Sold/Expired [ORDER THREAD]: Custom IRIS 1xCR123/1x18650 XP-G R5 Multi Colors and Options

[Delghi]

[ORDERS CLOSED]: Custom IRIS 1xCR123/1x18650 XP-G R5 Multi Colors and Options

Hello :wave:

I'm would like to introduce my first entirely custom designed light: I called it Iris

Every "Iris" is CNC machined in my local workshop from aluminium 7075-T6 bars .
Each one will be individually finished per customer request then every parts will be hand assembled and tested by me with the most care.

I developed it with time and passion trying to reach the best quality in every detail possible.


Iris features:

• Buck and boost, dual output driver (625/60ma)
• Runs on primary CR123 3v and single li-ion RCR123 or 18650 3.7v cell.
• Titanium Ti6Al4V bezel
• Dimensions: 101mm long and 28,7 mm head diameter
• 23,5mm smooth mirror polished reflector
• 2,85mm thick UCL@ mineral glass with Anti-Reflective coating
• Easy to upgrade, screw-in engine equipped with CREE XP-G R5 bin emitter
• Different finishes and options available.
• CNC machined progressive serial number
• 1,8mm thick NBR o-rings with vanilla scented Italian rubber tailcap boot
• Made in Italy

Finally here's a few pics:

Here some colors showoff..

*ORDERS CLOSED*

Price for the standard model is 130 Euro + shipping (~180$ + shipping at the time I'm writing)

To order please send the payment via paypal to [email protected] (orders closed, please do not pay) and be sure to let me know finish, interface, options and shipping preference in the notes.

I can accept only paypal payments (no extra fees needed) or bank wire Euro currency. Please pm or email me for more details if needed.

Since I receive the payment, I will need about 7-14 days to make, finish and assemble the light before shipping to you.


When ordering please choose one of these finish:

• Bare al finish.
• Blue, red, orange and green anodize.

Please choose one interface:

• Tactical: turns on always at high setting
• EDC: turns on at the last level used

Interface has been designed to be as simple as possible

No hidden modes or dozen of levels to mess with, only high and low, toggling between them with a double click.
When the light is on turn it off and turn it on in less then 1 sec to access the next level.
You can do it with or without latching the switch as many time and always be ready to change to the desired level.


Extra options:

• Extra 2.85mm UCL@ lens – Please add 8 Euro

SHIPPING

Price listed below include shipping charge up to 350grams enough to send up to a few lights with a single shipping.
Delivering time is about 7 days within Europe and a 7-14 days to USA and the rest of the world.

• Price within Europe is 7,50 Euro
• Price to USA is 10 Euro
• Price to Australia and Asia is 12,50 Euro
  

-----------------------------------------
Paypal example
Object: Orange Iris - CPF Josh
Notes: Payment sent for 1 orange Iris, edc interface, shipped to USA

------------------------------------

I have a few already machined Iris ready do be polished and anodized as you wish

Thanks for looking!
Davide

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

More:

I will accept order only one week more sorry but I need to optimize my day work.
Order will close on Sunday 7th March.

Thanks for understanding!

Here some higher resolution pics

 

[datiLED]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Wow. They are beautiful!

 

[supasizefries]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Wow beautiful work!

 

[donn_]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Very handsome lights, David!

Question:

Is the screw-in light engine Aleph compatible threading?

 

[nfetterly]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Davide,

Very nice - any chance of a lanyard attachment? In particular maybe a clip with a hole in it such that you can put a lanyard around the light and back out through the clip?

I work in industry & do not want to drop my lights into equipment (or on the floor).

Neale

 

[Burgess]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

These are Beautiful !

:kiss:
_

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Very handsome lights, David!

Question:

Is the screw-in light engine Aleph compatible threading?

Hi Donn!

This time I wanted to mke something unique, the engine is not compatible with Aleh lights, it has been thought and designed ad hoc for the Iris.

Davide,

Very nice - any chance of a lanyard attachment? In particular maybe a clip with a hole in it such that you can put a lanyard around the light and back out through the clip?

I work in industry & do not want to drop my lights into equipment (or on the floor).

Neale

Yes I understand what you mean They already have a lanyard attachement on the tailside, you can see it here:

I also uploaded a high resolution pic in the second post, you can see it better.

 

[TranquillityBase]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Nice light Davide...love the engraving too, very classy:twothumbs

 

[Icarus]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Wow. They are beautiful!

+1 :twothumbs

 

[Moka]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

What are we talking about in terms of output, runtime, efficieny etc...
Beamshots?
May have to get one of these in the new year :thumbsup:

 

[octaf]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Any chance of Ti version?

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Regarding some questions I got:

Yes it use the best switch available: the McClicky:

While loading it from the back and I developed a wider edge rubber boot that lays wider in the the tailcap housing allowing a secure sealing when screwed in the rear bezel.

I still did not rated water proof but I pretty much overbuilt it and should perform very well in damage and water resistance. The 7075 aluminium while stronger also got me brighter colors when anodized.

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

What are we talking about in terms of output, runtime, efficieny etc...
Beamshots?
May have to get one of these in the new year :thumbsup:

Yes I'll try to get up some beamshot later tonight!

No worries, I have a few Iris machined ready and I'm accepting orders on them but with Xmas holidays my anodizer will be full operative by the first week of January, sure the first you the first you get it

Any chance of Ti version?

Well, at the moment I'm pretty satisfied about 7075 alumium performance but I'm a titanium lover myself and I'll may think of a ti version in the future

 

[blitzlicht65]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Hi Davide,

is it possible to get two trit slots (for 1,5mm x 5,5mm trits) instead one lanyard attachement-hole in the tailcap?

If yes, I'll take #001 in black.



Greetings

 

[Barbarian]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

152 (Euros) for:

(1) Blue Iris with EDC Interface and Ti bezel upgrade shipped to the USA.

Thank you Davide and Merry Christmas,
Tim

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Hi Dirk!

I sent you a pm about your trit request.

Oh yes and Merry Christmas all!

 

[blitzlicht65]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Paypal sent for:

-1x black Iris with three trit slots for 1,5 x 5mm vials
-Edc interface
-Ti bezel upgrade
-Shipped to Germany




Thanks and merry christmas

 

[Delghi]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Here's a sightly underexposed shot tho show the beamshape, the reflector is wide and deep enough to have e nice focused hotspot with the XP-G R5, getting around 240 Lumens at the emitter!

And here's another inside pic

 

[strinq]

Re: Introducing: Custom IRIS - 1xCR123 XP-G R5 Multi Colors and Options *PICS*

Those are beautiful lights and look at the beam pattern! :twothumbs