Raoul_Duke
Enlightened
Is it possible to run a P7 Direct drive in a 6D mag on primaries?..... 3S x 2P
What I have is a 6d mag and access to 'free' primaries ( I would be using the light at work) Not realy interested in messing about connecting a bunch of drivers, or multi mode wizardry together. Just want a stock switch, cut down stock reflector ( if they dont melt) and a use a heat sink bought from somewhere here on CPF, to do a real simple mod.
So I thought I doubt that primaries could handle the ~3A required for the P7, but If I put 6 in a 6D, and had 3 primaries in series, and another 3 in series running in parallel ( there is battery rattle in the light, so room enough for wires to series/ parallel. Would that be enough capacity to work reasonably well?
Of course if there is a SIMPLE driver out there, I woulden't mind popping one in, but If it all gets to technical, I'm a Direct Drive hotwire incan kinda guy, so I'd just stick with those for now.
What I have is a 6d mag and access to 'free' primaries ( I would be using the light at work) Not realy interested in messing about connecting a bunch of drivers, or multi mode wizardry together. Just want a stock switch, cut down stock reflector ( if they dont melt) and a use a heat sink bought from somewhere here on CPF, to do a real simple mod.
So I thought I doubt that primaries could handle the ~3A required for the P7, but If I put 6 in a 6D, and had 3 primaries in series, and another 3 in series running in parallel ( there is battery rattle in the light, so room enough for wires to series/ parallel. Would that be enough capacity to work reasonably well?
Of course if there is a SIMPLE driver out there, I woulden't mind popping one in, but If it all gets to technical, I'm a Direct Drive hotwire incan kinda guy, so I'd just stick with those for now.