Pocket Thrower ++Beamshots added++

[zelda]

Finnaly the "red-evil" is finish:

SSC U-Bin, Wizard2 750mA, AW 14500 Li-Ion Cell, 20mm IMS

Its very small, handy and powerful. I bored the tube a little bit out for a better thermal contact.

Some "Victims" who played the first time with this Flashlight looked just once in the beam...

~150 - 160 "bulb lumens"

Update:

Fenix L2P

Minimag Lux1 400mA IMS 20

SSC P4 400mA McR-20

"The pocket Thrower"



Zelda

 

[Essexman]

Re: Pocket Thrower

Very nice. Could you give some more details on how it all goes together. Is the heatsink the emitter sits on a drop in unit? Or did you make it yourself? Where did you get the short mini mag from?
And of course, can I be the first to say..........
Beamshots please!

 

[mayo]

Re: Pocket Thrower

Very Nice!

 

[zelda]

Re: Pocket Thrower

The Emitter is on a 14.5 x 8 Alu-cylinder with a d14 x 4 bore, filled with glue (Araldit crystal) for the Wizard2. I cut and threaded the tube my self and its slittly bored. (The original tube is deformed from knurling.)

zelda

 

[r3d33m3r]

Re: Pocket Thrower

I just gave a blue one to a friend as a present, it had a lux driven at 1A and it would hurt the eyes even in broad daylight. I have another black one with 8 leds stuck into it. As far as i am concerned, this is the best keychain light EVER. Smal very nice looking, tough and with about an hour run time with all that brightness, man it ia AMAIZING. Awesome work man, enjoy it.

 

[zelda]

Beamshots added.

Zelda

 

[roadie]

nice ...

but somehow i see more spill flood lights on the side than a "hot" spot .....in the centre....

maybe can try post at a further distance please?

 

[zelda]

I will do that tomorrow. I know, its not the best target, in the pictures its a metallic brown door. (20 meters away)

zelda

 

[roadie]

ooops jus an suggestion though .........


can get a non reflective target?

how u did the end cap ? teach teach ......

 

[Ledean]

Very nicely done especially the housing for the nexgen.

 

[zelda]

ooops jus an suggestion though .........


can get a non reflective target?

Actually its fullmoon and the sky is clear

I promise to make some outdoor beamshots

how u did the end cap ? teach teach ......

If you mean this one? :Kroll Tailcap Switch


zelda

 

[zelda]

Isn't quite simple to take some photos outdoor :candle:

First: Fenix L2P
Second: SSC P4 400mA McR-20
Third: "Pocket thrower"





zelda

 

[roadie]

:goodjob:

 

[Icarus]

Very nice mod! :goodjob: :twothumbs

How much did you bore the body?
The pill is also very nice. I suppose it fits snugly?
Did you use thermal paste?

 

[jag808808]

what is the runtime?