Power output of Fenix L2D Premium with L1D body

[rt00]

Hi ,

If I was to use Fenix L1D body on a L2D Premium 100 will it still retain its power output of 175/100/50/11 Lumens? If so would the run times be roughly half of the L2D which is advertised at 2.4/4/10.5/55 hrs.

 

[Steve L]

The output should be about the same with less runtime in general mode. You will have less output and runtime on turbo using the L1D body. Go to Lighthound and compare the L1d and L2D both using the rebel 80. Here's a link :http://www.lighthound.com/index.asp...s=75&btnSearch=Search&AdvSearchAction=GOFETCH

 

[moses]

L1D is on AA right? Then the max should be around 100 lumens. I have one that's a bit over 100 and one around 100.

 

[meuge]

Hi ,

If I was to use Fenix L1D body on a L2D Premium 100 will it still retain its power output of 175/100/50/11 Lumens? If so would the run times be roughly half of the L2D which is advertised at 2.4/4/10.5/55 hrs.

When you go down to 1xAA battery, you will largely lose the difference between Turbo and High, because 1xAA cannot provide the power required, so the breakdown will be more like 110/100/50/11 Lumens... with the corresponding runtime.

Another option that you can consider if you do not want to lose the turbo, is to get a P2D body to use with CR123 batteries... which will shorten the runtime to about 40% of the L2D, but will retain the Turbo output.

 

[selfbuilt]

As others have said, you will basically loose Turbo mode (will be same as Hi).

Runtimes for R100 head on L1D body are here:
Fenix Rebel vs Cree: OUTPUT, RUNTIMES, BEAMSHOTS