Seeking modder to install 3-stage board in Romisen RC-C6

[sithjedi333]

Hi all,

I'm looking for someone who knows their way around the insides of the Romisen RC-C6 and could swap out a 3 stage board. I would be using 2xAA eneloops and alkalines, and would be looking for a board with:

1.5-2 hours on high
5-7 hours on medium
15-25 hours on low

Ideally low > medium > high with no memory, possibly 5 mode if strobe/SOS are at the end and there's no memory.
Overdischage protection for NiMH cells would be a plus.

Please let me know. I would be interested in having a few of these done. Thank you.

 

[^Gurthang]

333,

Do you have a driver in mind? I'll assume a P60 type pill so you want a low V boost driver. Did you check the driver database in the electronics / battery forum?

 

[sol-leks]

cool, hope this works out for you.

 

[sithjedi333]

Gurthang, thanks for pointing me to that database, it's a great resource. I think this one looked to be the most appropriate

http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243

KD sku 10243

These might fit my criteria somewhat as well
http://www.dealextreme.com/details.dx/sku.7882~r.85749907

http://www.dealextreme.com/details.dx/sku.15880~r.85749907

But I'm open to any suggestions, since I'm not an expert on boards.

Thanks!

 

[old4570]

Gurthang, thanks for pointing me to that database, it's a great resource. I think this one looked to be the most appropriate

http://www.kaidomain.com/ProductDetails.aspx?ProductId=10243

KD sku 10243

These might fit my criteria somewhat as well
http://www.dealextreme.com/details.dx/sku.7882~r.85749907

http://www.dealextreme.com/details.dx/sku.15880~r.85749907

But I'm open to any suggestions, since I'm not an expert on boards.

Thanks!

I have the first , and it wont work as 2xAA , will work as 1xAA / Problem with this driver [ the 2 I have ] is the low voltage warning [ CR123A / 18650 ] and the fact that 2xAA come in at this warning point , and will not function correctly [ can you turn the warning off ? ]
2nd one ?
3rd one is probably the best one for 2xAA

 

[sithjedi333]

Old,

Thanks for pointing that out, dunno how I missed that.