SF X-Series : Differences on P2ZX and Z2X, etc.?

[akula88]

Hi.

I just just acquired some interest and had been back-reading a number of threads on the Surefire X-Series lights, but still have some questions :

- What are the basic difference between P2ZX versus Z2x? Do the have the same body with different markings?

- Tailcap - I have an OR McClicky, but it seems that it's spring is short, and does not function with my Fury.

Thanks.

 

[lumensbadger]

Been running my Fury P2X 500 lumens version with the McClicky installed since 4 (?) years.

installation is no different to other Surefire endcaps.

Hope that helps.

Alex

 

[lumensbadger]

But since we are talking Fury:

I have been tossing around the idea of legoing the Fury head on a Mini Scout / E-series body and run it on a single 16340 Keeppower high amp rechargeable. It will be serving as a HD weapon light - therefore runtime is a secondary consideration. Short bursts of light is the name of the game. If I run out of juice on the scout, I will default to a handheld.

Is anybody aware of a adapter / adapter ring for the X generation bezel to the E series body?

The x-series heads are fixed with loktite. But that can be overcome

 

[id30209]

If i remember correctly, P2X use XML emitter where Z2X has XPL


Sent from Tapatalk

 

[akula88]

Thanks for chiming in.

After this post, I run into this Korean SF review site. There was specific page on these comparison. Here is the translated link.

In summary, this is what it says :
Z2X and P2ZX are both X-series Fury combatlight bodies

Z2X had an older 320 lumens
P2ZX has a newer 500, then 600 lumens XM-L2 emitter. Head is also a bit longer, and has more pronounced anti-roll cuts.



출처: https://6dhfbnkcupmcuhj44fzbs75p4a-...fire-Combatlight-G2ZX-Z2X-and-P2ZX-comparison [Flashlight DNA]

 

[akula88]

But since we are talking Fury:

I have been tossing around the idea of legoing the Fury head on a Mini Scout / E-series body and run it on a single 16340 Keeppower high amp rechargeable. It will be serving as a HD weapon light - therefore runtime is a secondary consideration. Short bursts of light is the name of the game. If I run out of juice on the scout, I will default to a handheld.

Is anybody aware of a adapter / adapter ring for the X generation bezel to the E series body?

I'm not aware on a custom modder doing an adapter, but I believe is doable.

There is actually a Fury WML, known as the M620P model - but that's a 2-cell weaps light. It's a Fury head with factory-installed/built adapter on the E-series M6xx weapon-mount bodies. Fury can run under 3.7v Li-Ion batteries.