Sold/Expired SOLD OUT: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

[KBobAries]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Picked up the tailcap today. Nice work. :thumbsup:

Dan

Thanks... Payment received.
I'll get this shipped out asap.

R-

 

[etc]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Does it need a spacer with Hound Dog? Tight fit? Looking to use something better versus the stock tailcap that came on the MD4 body .

 

[mk2rocco]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Does it need a spacer with Hound Dog? Tight fit? Looking to use something better versus the stock tailcap that came on the MD4 body .

I ran one on an 18650 HD with no issues.

 

[peter yetman]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Does it need a spacer with Hound Dog? Tight fit? Looking to use something better versus the stock tailcap that came on the MD4 body .

Perfect on an MD4 HD visually and balancewise. No spacer, no tight fit, get one.

P

 

[etc]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Okay. Looks like black is sold out, how does "natural" mate with Hound Dog MD4? The slightly older XML version.

 

[nbjly]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2



Lot #3 "V2 Natural" $65
36, Natural, Available, xxx

:thanks:

 

[Brigadier]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Lot #3B "V2 Natural" Blems $55
10, Natural, Available, xxx




:thanks:

 

[jal]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Please put me down for

Lot #3B "V2 Natural" Blems $55
#11

PP on its way.

Love them!

 

[RPM]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Lot #3B "V2 Natural" Blems $55
10, Natural, Available, xxx

Please put me down for

Lot #3B "V2 Natural" Blems $55
#11

PP on its way.

Love them!

Thanks for the orders... I'll get these shipped on Saturday.

R-

 

[Powerup]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Lot #3B V2 Natural
Blems:
#12
#13
PP sent.
Thanks.

 

[RPM]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Lot #3B V2 Natural
Blems:
#12
#13
PP sent.
Thanks.

Payment received. Thanks for the order... I should get these out this weekend.

R-

 

[black bolt]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Has anyone installed a Judco tail switch in one of these RPM tailcap? I just destroyed the McClicky tail switch in my RPM tailcap because the Jam nut holding it would not even budge. Richard, is the Jam nut glued in? My RPM C series tailcap has the trit slots so I'm not to sure which batch this came from.

 

[chago]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

I'll take: Lot #3B "V2 Natural" Blems $55 (#14). PM sent with question about shipping.

 

[RPM]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

I'll take: Lot #3B "V2 Natural" Blems $55 (#14). PM sent with question about shipping.

PM replied...

R-

 

[RPM]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

Has anyone installed a Judco tail switch in one of these RPM tailcap? I just destroyed the McClicky tail switch in my RPM tailcap because the Jam nut holding it would not even budge. Richard, is the Jam nut glued in? My RPM C series tailcap has the trit slots so I'm not to sure which batch this came from.

I use a little thread locking compound on the jam nut.
It will need some heat applied to loosen it up be fore you try to remove it.
The tool I use to tighten the nut down has 4 drive pins.... these are on tight and I wasn't expecting them to be taken apart.
If the McClicky switch fails, I will replace it at no charge. I can't say what other switch will fit into one of my tails.

R-

 

[chago]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

PP sent! Thanks!

 

[black bolt]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

I use a little thread locking compound on the jam nut.
It will need some heat applied to loosen it up be fore you try to remove it.
The tool I use to tighten the nut down has 4 drive pins.... these are on tight and I wasn't expecting them to be taken apart.
If the McClicky switch fails, I will replace it at no charge. I can't say what other switch will fit into one of my tails.

R-

Thanks for replying to my question. PM sent.

 

[Icarus]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2

I'll take... Lot #3 "V2 Natural" 37, Natural, Available, $65

 

[morepho87]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2... Blems added

Paypal sent for:

Lot #3 V2 Natural.. # 38 and 39. Thank you

 

[RPM]

Re: FS: RPM Clickie "C" Series Tail Switches… Sales Thread Part 2... Blems added

Thanks... $$ received.
I'll get these shipped out in a few days.

R-

Paypal sent for:

Lot #3 V2 Natural.. # 38 and 39. Thank you