old4570
Flashlight Enthusiast




Pictured with Xtar 18700 [ yes plenty of room + some to spare , even with a 18700 ]
Power cord = 1.4meters
Power Adapter = 110 – 240volt 50/60Hz @ 1Amp
Output = 12v DC – 1.2A
Euro Zone plug
Charge rates
Batt @ 4.05v charge rate = 400mA
Batt @ 4.13v 4.15v charge rate = 200mA
Batt @ 3.82v charge rate = 900mA to start then eased to 800mA holds 750mA
This charger does not turn of on completion , but rather trickle charges .
With my multi meter as part of the circuit , I got the following readings .
Blue light comes on around 4.15v and the main charge cycle stops and then trickle charges @ 52mA
Battery @ 4.18v , trickle charges @ 40mA
Battery @ 4.19v , trickle charges @ 29mA
Battery @ 4.2v , trickle charges @ 25mA
@ 4.23v its trickle charging at 4mA
Now the MM seems to affect the charger when its part of the circuit , so Im currently charging a battery to see where it terminates , as with the MM it was terminating the charge @ 4.15 and going to trickle charge mode ..
So I drained a battery to 2.85v threw it right into the charger [ charging @ 0.99A ] So hopefully it will maintain a good rate up to about 3.8v [ I hope ]
More info as it comes to hand .
Last edited: