Surefire Lego?

[Eric242]

I bought these at a german shop, Sierra 313. Might help if you search for "National Molding Zipper Pull" if you didn´t already.

Slight update on my LegoLight. I scrapped the Surefire Lanyard ring and attached a Novatac EDC clip. The clip fits perfect! As if made for a 6PD head on a FM 18500 body.

http://www.ea242.de/pic/lampen/18500-*******5.jpg

 

[bullfrog]

Thanks Eric for the quick response and guidance - appreciate it!

Also, what a sick combo!

 

[DHart]

Fun with Legos!

Here are some of my latest lego goodies... I am leaning heavily toward 1-cell lights these days.

A "TW4" - KL4 head on E1e body (the stock KL4 head kicks up a nice flood w/ a RCR123 rechargeable!)

P7 Goodness - Malkoff P7 head (turns the little 3P body into a tiny TIGER!)

Malkoff P7 in 6P head on FM 3P body w/Z59 Tailcap, powered by AW IMR16340 (pocketable TIGER!)

M30 lamp in 6P head with E2C adaptor on FM 1*16340 body

E1B w/Z68 tailcap (not much of a lego, but I like the change for candle mode)

TLS Head on E1e body (this head really rocks with a rechargeable RCR123!)

 

[AzGB]

I'm pretty sure your E1B has a Z68 on the end of it, and not a Z49. If memory serves, a Z49 is a C series clickie with a rubber guard surrounding the button, and a Z68 is the non-crenelated E2D tailcap included with the M600 Scout series.

Either way, I'm a fan of that configuration, since that's been my primary EDC since the light came out on the market.

Very nice photography, by the way.

 

[DHart]

AzGB.... thank you so much! You are absolutely right.... my mistake, it's a Z68 tailcap for sure! I appreciate the correction. Your E1B looks well loved! They're nice lights for sure. And glad you like the pics. (My business is portrait and commercial photography.)

 

[bigchelis]

Here I go again. I been working on a lego Hope you guys like it.

It is a 3in Surefire 3P parts. It can house any P60 from as high as 700 lumens to 235 lumens with a M30. Currently; I just traded my P7 P60 but it still has plenty of usefullness with the Malkoff stuffed in it.

Okay folks now I know some of you have some sub 3in P60 Surefire Lego's out there. Please post some pictures...

 

[soup_monger]

 

[herbicide]

More lego == more fun.

[Torch food, Solarforce head w/ E2C adapter, Valiantco extender, E1 body and twisty switch, McTC, Lamp Assemblies]

[Lamps]

[E2C on the head]

[Early model? - w/ aftermarket dust...]

[Really bright, not as tight]

[90lm]

 

[gallonoffuel]

Just got the parts in for this this afternoon. Just in time too, since I'm going to a trade show this week that Surefire will be attending Gotta see what they think of this, and try out an F04 and F05 on it.

 

[bigchelis]

Just got the parts in for this this afternoon. Just in time too, since I'm going to a trade show this week that Surefire will be attending Gotta see what they think of this, and try out an F04 and F05 on it.

The E1e w/ Defender bezel and clickie is amazing. It screams quality and with IMR incan drop-ins there is more potential than meets the eye.

Very nice..

 

[gallonoffuel]

The E1e w/ Defender bezel and clickie is amazing. It screams quality and with IMR incan drop-ins there is more potential than meets the eye.

Very nice..

Thank you for the compliments. I do wish I started with an E1B body though. I really prefer bezel-down clips, since most of the weight sits in the bezel end.

 

[soup_monger]

My E1E was too heavy with the stainless steel bezel.. so I picked up an $8 aluminium one and ground the "teeth" off it.

The bezel is still thick.. and long enough to protect the window.

The TNC clicky is much higher quality than the Surefire one.... imo.

 

[kungfumo]

doesnt quite work but its still cool

This one works, I swaped the tail cap out for a m4 tail and plan to work on it some more later.

 

[angelofwar]

Here's my C4T, from my thread in the incan forum. C3 w/ A19, two combat grips, KT1 w/ MN60. SCHWEEEETTTTTT!!!:nana:

 

[Blindasabat]

Also from the "This doesn't quite work" department:

On the right next to an E1L for size comparison: Mini "Zero-P" with KL3 - battery not yet made to fit it. Unless a few CR2032's will work.

 

[DM51]

OK, how about this one? LOL

 

[soup_monger]

OK, how about this one? LOL

That one makes me laugh every time I see it.

There's no battery in there... right?

 

[DHart]

That one makes me laugh every time I see it.
t?

Yeah, me too.

 

[kungfumo]

Come on find a way to make it work

 

[gswitter]

I like how this one came together...

Ganp A19 head (reminiscent of 1st gen KL1), XR-E Q4 engine from a McGizmo "dumb" Mule head, round L1 body, Oregon Shooter tail shroud.

I prefer the length of the L1 Cree body with this head, but I couldn't pass up the ano match with this round body.