Tana
Flashlight Enthusiast
Tana eMt3 M-series modules for Surefire M3...
So... here it is...
eMt3 LED upgrade module for Surefire M3 CombatLight
Pics should explain everything, few posts down there is some more details on these...
These modules are hand crafted and variety of LEDs and drivers can be used... PM me for any details but below list with prices should be self-explainatory... again, read first page of the thread for more info of these and I might make more "professional" first post that would have all necessary info about these modules...
NOTE: Cut-off voltage on these drivers for now is 3.6V... 3xCR123 primaries in series is OK to be used with them but they might be drawn down to rather low voltage - Protected li-ion cells are recommended (as any other aftermarket module that offers 2xli-ion config but would work on single li-ion as well)... cells recommended are 2x Protected AW 17500 Black (in non-bored body) or 2x Protected AW 18500 Black (in bored body)...
NOTE: THIS HAS JUST STARTED !!! Two modules from the photos FIT MY SUREFIRE M3 LIKE A GLOVE !!! However, even with Surefire there might be SLIGHT tolerances in different runs that might prevent proper contact between these modules and your M3... so there is a SMALL chance of contact issue - at least until first 5-6 modules get to their new owners and they try them in different combos...
Prices:
$116 eMt3 XPG2 R5 1C (6500K, CW), 3.6-18V, SINGLE MODE, 1.2 Amps (about 350 OTF lumens)
$126 eMt3 XPG2 R5 1C (6500K, CW), 3.6-9.6V, 3-MODE, Low/Med/High with memory, 1.1 Amps (about 20/115/350 OTF lumens)
$116 eMt3 Nichia 219B D220 (4500K, NW), 3.6-18V, SINGLE MODE 1.2 Amps (about 260 OTF lumens)
$126 eMt3 Nichia 219B D220 (4500K, NW), 3.6-9.6V, 3-MODE, Low/Med/High with memory, 1.1 Amps (about 15/85/260 OTF lumens)
NOTE:
These modules are rather complicated to make and I have to find time between modding e-series to make them, please allow 10-20 days for shipping after the payment... Once I catch up with the list, I'll give my best to carve couple of them in advance so cut the wait time below 10 days... as soon as I'm sure that I can ship out in less than 10 days, I'll update this part...
P.S.
The little GODZILLA is not my pet nor it was tortured in any way - it was fed while in custody for couple of hours and then set free in the wild on Adriatic coast... it loves salad and apple but doesn't like tomato for some reason...
-
You can contact me over email (this is not my paypal email):
So... here it is...
eMt3 LED upgrade module for Surefire M3 CombatLight
Pics should explain everything, few posts down there is some more details on these...
These modules are hand crafted and variety of LEDs and drivers can be used... PM me for any details but below list with prices should be self-explainatory... again, read first page of the thread for more info of these and I might make more "professional" first post that would have all necessary info about these modules...
NOTE: Cut-off voltage on these drivers for now is 3.6V... 3xCR123 primaries in series is OK to be used with them but they might be drawn down to rather low voltage - Protected li-ion cells are recommended (as any other aftermarket module that offers 2xli-ion config but would work on single li-ion as well)... cells recommended are 2x Protected AW 17500 Black (in non-bored body) or 2x Protected AW 18500 Black (in bored body)...
NOTE: THIS HAS JUST STARTED !!! Two modules from the photos FIT MY SUREFIRE M3 LIKE A GLOVE !!! However, even with Surefire there might be SLIGHT tolerances in different runs that might prevent proper contact between these modules and your M3... so there is a SMALL chance of contact issue - at least until first 5-6 modules get to their new owners and they try them in different combos...
Prices:
$116 eMt3 XPG2 R5 1C (6500K, CW), 3.6-18V, SINGLE MODE, 1.2 Amps (about 350 OTF lumens)
$126 eMt3 XPG2 R5 1C (6500K, CW), 3.6-9.6V, 3-MODE, Low/Med/High with memory, 1.1 Amps (about 20/115/350 OTF lumens)
$116 eMt3 Nichia 219B D220 (4500K, NW), 3.6-18V, SINGLE MODE 1.2 Amps (about 260 OTF lumens)
$126 eMt3 Nichia 219B D220 (4500K, NW), 3.6-9.6V, 3-MODE, Low/Med/High with memory, 1.1 Amps (about 15/85/260 OTF lumens)
NOTE:
These modules are rather complicated to make and I have to find time between modding e-series to make them, please allow 10-20 days for shipping after the payment... Once I catch up with the list, I'll give my best to carve couple of them in advance so cut the wait time below 10 days... as soon as I'm sure that I can ship out in less than 10 days, I'll update this part...
P.S.
The little GODZILLA is not my pet nor it was tortured in any way - it was fed while in custody for couple of hours and then set free in the wild on Adriatic coast... it loves salad and apple but doesn't like tomato for some reason...
-
You can contact me over email (this is not my paypal email):
Last edited: