- Joined
- Dec 26, 2006
- Messages
- 164
Looking for measurements of Tri EDC head length vs EDC head length. Mt SST-50 head measures 1.55". The head on the other Mac's that I just bought is 1.45". This second one is a bare host
The length of my Tri EDC aluminum head is 1.153" long x .991" in diameter.
....
Could the SST-50 EDC and XM-L EDC have used different (length) reflectors? That's the only thing that comes to mind with the info you've offered.
....
I had a Ti EDC with a SST-50 and a Al EDC with a XML in it. I swapped the LE w/ reflector in the host without a problem. The two host were the same length. It could be from a time period he was using a different reflector. I would say that both I had were the later versions since they both would accept a 18350 cell. Do you know if the shorter host was or is originally for use with a 16340 cell? That may not be relevant, just curious.
....just so we're straight you're saying the difference is only 2.54mm? ....
.... that when I measured them and found the difference of .1"....
....It could be from a time period he was using a different reflector....