Sold/Expired Triple Seoul P7 / Cree MC-E Kit for Mag D

[Der Wichtel]

NOT FOR SALE ANYMORE. Please have a look here for a better solution:
http://www.candlepowerforums.com/vb/showthread.php?314981-Triple-Cree-XM-L-T6-Dropins-for-D-size-Mag-Lites/

Hi,
I have some parts for a triple P7/MC-E Mag-Lite setup for sale.

The triple P7/MC-E Kit includes the following parts:

1x anodized Heatsink for D Mag-Lites
3x Reflectors
1x Driver
1x O-Ring

and costs 45€ ( single mode kit) plus 3.40€ shipping within Europe and 6€ for everywhere else.
For registered mail please add 2.05€. If something gets lost with registered mail, I'll refund the money or send the ordered parts again.

Kits with version A/B driver cost 50€.

The driver needs at least about 13V-14V to drive the LEDs. Four or five Lithium Ion batteries in series can be used to drive them.

The parts can be bought seperately for:

- 15€ for the anodized heatsink
- 5€ each reflector ( 23mm dia.) for Seoul P7 or Cree MC-E
- 20€ for the single mode driver
- 25€ for version A/B driver
- 0.5€ for the O-Ring ( needed to avoid scratches on the lens caused by the heatsink)


Driver information can be found here:
http://www.candlepowerforums.com/vb/showthread.php?p=2545117#post2545117

Shipping costs are the same as above.

please contact me via pm or mail

for payment information

​

Higher resolution pictures:

http://daoriginal.da.funpic.de/data/Dsink/IMG_0713.JPG
http://daoriginal.da.funpic.de/data/Dsink/IMG_0715.JPG

A short video of how to build it together
http://www.youtube.com/watch?v=HyLR-H_5a88

For beamshots look at this thread:
http://candlepowerforums.com/vb/showthread.php?t=228206


Update 15.03.2010:

Improved heatsink and reflector design for Seoul P7

Update 2.01.2010:

Unfortunately Deutsche Post has rised up the shipping cost within Europe to 3.40€.
I really don't understand why they are doing this since this would be nearly twice as much as other European countries....:thumbsdow


Update 14.08.2009:
- all kits will be shipped with the new driver
http://www.candlepowerforums.com/vb/showthread.php?p=2545117#post2545117

Update 22.04.09
"unfortunately I have to say that all heatsinks are sold... but I will have new ones in about 2 weeks "

Update 19.05.09

It took a little bit longer than expected but they are now available again.
The new batch has a better anodizing and surface finish.

​

 

[nailbender]

Re: Triple Seoul P7 Kit for Mag D

H i

I will take 2X Tri heat sink
6X Reflector
2 X o-ring
1 shipping


Thanks

Dave

 

[niner]

Re: Triple Seoul P7 Kit for Mag D

Hello,

I'll take:

1x heat sink, 15€
3x reflector, 15€
2x o-ring, 1€
1 shipping, 6€

Paypal sent, total = 37€

Thanks!

 

[acourvil]

Re: Triple Seoul P7 Kit for Mag D

Looks like a really nice kit.

How hard would it be to wire to an external pot to allow control of the current?

 

[campguy00]

Re: Triple Seoul P7 Kit for Mag D

I'll take 1x kit

45€ + 6€ = 51€




Thanks,
Matt

 

[Der Wichtel]

Re: Triple Seoul P7 Kit for Mag D

Looks like a really nice kit.

How hard would it be to wire to an external pot to allow control of the current?

Hmm, there is a 10k resistor on the board which can be replaced by a little 10k pot. Then you'll be able to dim the light.


the orders of following posters have been shipped:

nailbender
niner

 

[ma_sha1]

Re: Triple Seoul P7 Kit for Mag D

I'll take:

1x heat sink, 15€
3x reflector, 15€
2x o-ring, 1€
1 shipping, 6€

Total 37 €



Thanks

 

[StefanFS]

Re: Triple Seoul P7 Kit for Mag D

Hej,

PP sent for parts:
- 15€ for the anodized heatsink
- 5€ each reflector ( 23mm dia.)
- 0.5€ for the O-Ring
- 3€ shipping

Total 33.5€

Thanks,
Stefan

 

[tabetha]

Re: Triple Seoul P7 Kit for Mag D

I have just looked at the beam shots, and hurt meself as I fell off the chair in shock!!!!
Jesus that is ace/awsome/brill what more can I say, I salute you, seriously thinking of getting a mag just so I can do this conversion, but going to try on a older torch of mine first.
I see you are german, ich habe zeit ungefar 16 jahre im Deutscheland gewohnt, und meine geburtzplatze ist im Deutschland, am Wegberg, meine vater va mit der armee fur acht und zwanzig janhre.
Good english you have too!!
tabetha

 

[olav]

Re: Triple Seoul P7 Kit for Mag D

Hallo Wichtel !

Here's my order:
2 x 15e heatsinks
6 x 5e reflectors
2 x 0,50e O-rings
1 x 3e shipping

Total 64e

Vielen Dank nochmal !

 

[acourvil]

Re: Triple Seoul P7 Kit for Mag D

Hmm, there is a 10k resistor on the board which can be replaced by a little 10k pot. Then you'll be able to dim the light.


the orders of following posters have been shipped:

nailbender
niner

O.k., I'll take a kit.

45€ + 6€ = 51€

Could you send me your paypal address? Also, if you could point out the 10k resistor for me I would appreciate it. Also, if you have any info on the effects of varying the resistance on the output, I would appreciate anything you could tell me.

Thanks!

Art

 

[Pontiaker]

Re: Triple Seoul P7 Kit for Mag D

I'll take one complete kit for 45 plus 6 shipping to US. Let me have your Paypal for pyament?
Thanks!
Matt

 

[Der Wichtel]

Re: Triple Seoul P7 Kit for Mag D

I have just looked at the beam shots, and hurt meself as I fell off the chair in shock!!!!
Jesus that is ace/awsome/brill what more can I say, I salute you, seriously thinking of getting a mag just so I can do this conversion, but going to try on a older torch of mine first.
I see you are german, ich habe zeit ungefar 16 jahre im Deutscheland gewohnt, und meine geburtzplatze ist im Deutschland, am Wegberg, meine vater va mit der armee fur acht und zwanzig janhre.
Good english you have too!!
tabetha

Danke,
sieht so aus als wärst du schon eine ganze Weile nicht mehr hier gewesen

O.k., I'll take a kit.

45€ + 6€ = 51€

Could you send me your paypal address? Also, if you could point out the 10k resistor for me I would appreciate it. Also, if you have any info on the effects of varying the resistance on the output, I would appreciate anything you could tell me.

Thanks!

Art

I can make stick a little sticker on the resistor

I'll take one complete kit for 45 plus 6 shipping to US. Let me have your Paypal for pyament?
Thanks!
Matt

paymentinfo sent

 

[jibjob79]

Re: Triple Seoul P7 Kit for Mag D

What is the maximum voltage that the driver can take?

 

[Der Wichtel]

Re: Triple Seoul P7 Kit for Mag D

The components on the driver are rated at least for 30V.
My powersupply can only deliver 20V which works fine. I think 25V input is possible as well but it's very close to its limits

 

[Eirik]

Re: Triple Seoul P7 Kit for Mag D

paypal info plz ??

 

[Eirik]

Re: Triple Seoul P7 Kit for Mag D

Hallo Wichtel !

Here's my order:
2 x 15e heatsinks
6 x 5e reflectors
2 x 0,50e O-rings
1 x 3e shipping

Total 64e

 

[Eirik]

Re: Triple Seoul P7 Kit for Mag D

drivers !! how did i forget??
ad 40€ for the drivers pp sent

eirik

 

[Der Wichtel]

Re: Triple Seoul P7 Kit for Mag D

drivers !! how did i forget??
ad 40€ for the drivers pp sent

eirik

It's cheaper for you to buy the complete kit.

I will return the money you have send me. Instead of 104€ you just have to pay 93€

 

[Eirik]

Re: Triple Seoul P7 Kit for Mag D

93€sent!!

eirik