KeeperSD
Enlightened
I jumped on the Wolf Eyes website today looking for some confirmation for another thread when i noticed these on the front page. I had heard some rumours of these from Glen, but hadn't looked into it any further. Well here they are.
http://www.wolf-eyes.com/product/P7-Sniper detail.html
http://www.wolf-eyes.com/product/P7-E2 detail.html
Rather than me summarising the information on the website i will quote it directly, hopefully this is acceptable to the mods, if not let me know and i will pull it down. I haven't seen any other mention on it yet so i thought i would start a new thread on it.
Looking at the specs, the P7 adds another 20mm to the length, whilst the bezel looks to also add 20mm over a standard Sniper. The bezels are also compatible with the current Snipers and Eagles, so i am assuming that an upgrade package may also be in the offering.
With this being one of first of the reputable mass produced lights to use the P7 it will be interesting to see what they come up with. I am looking forward to seeing one of these in action, although the wife doesn't quite share the same enthusiasm :shrug:
EDIT: I also notice at the bottom of the P7 page (http://www.wolf-eyes.com/product/P7.html ), that there is a M90 version listed, however there is no details on it as yet so i guess it is still under development.
http://www.wolf-eyes.com/product/P7-Sniper detail.html
http://www.wolf-eyes.com/product/P7-E2 detail.html
Rather than me summarising the information on the website i will quote it directly, hopefully this is acceptable to the mods, if not let me know and i will pull it down. I haven't seen any other mention on it yet so i thought i would start a new thread on it.
www.wolf-eyes.com; said:Brightness:580Lumens (full brightness stage)
Runtime: full brightness stage:1 hour with regulated output ; 2 hours with unregulated output.
Body:Aerospace grade aluminum construction.
Reflector:High temperature processed, layers of alloy coating films.
Finish: Low temperature (-20℃) hard - anodized (HA) finish treatment.
Lamp: SSC P7 LED Lamp Assembly 3.7-6.0V
Switch: Rapid switch between Morse-on and lock-on with over 50,000 times life cycle.
O-ring sealed: Splash proof.
Beam: flood beam with good combination of throw
Weight without battery: 185g
Length: 150mm
Body diameter: 25.4mm
Head diameter: 47mm
Operation Temperature: -25℃-60℃
Color: Tactical black
Package: gift box
Digital LED instruction:
-Soft press till the light comes on 100%, then further pressing the switch will activate default mode functions, according to the sequence of "maximum brightness (100% brightness) -> 30% brightness -> 2% brightness". When you have reached the desired level, press the switch fully to keep the light on at that level.
-When switch on/off for 7 times in Default mode, the light will turn into concealed mode, according to the sequence of "Strobe -> SOS-> Beacon signal".
-After switched off the flashlight for 2 seconds, the default settings resume, and the lamp will enter full brightness when being switched on again.
Looking at the specs, the P7 adds another 20mm to the length, whilst the bezel looks to also add 20mm over a standard Sniper. The bezels are also compatible with the current Snipers and Eagles, so i am assuming that an upgrade package may also be in the offering.
With this being one of first of the reputable mass produced lights to use the P7 it will be interesting to see what they come up with. I am looking forward to seeing one of these in action, although the wife doesn't quite share the same enthusiasm :shrug:
EDIT: I also notice at the bottom of the P7 page (http://www.wolf-eyes.com/product/P7.html ), that there is a M90 version listed, however there is no details on it as yet so i guess it is still under development.
Last edited: