Sold/Expired WTB Leef gear bodies

[ftumch33]

Looking for these...
C tail M head 2x18650 and 1x18650
C tail C head 1x18650 and 2x18650
and the ever elusive...
C tail E head 1x18650 or 2x18650
HA111 or Black

 

[ftumch33]

Still looking for Five Mega bodies.

 

[yazkaz]

HA111 or Black

You really mean, HA3 in Hard Clear (OD) or Hard Black?
AFAIK Leef bodies were only available in these two finishes, nothing less...

 

[archimedes]

Raw aluminum too

 

[yazkaz]

Raw aluminum too

Yes but relatively rare

Sorry but no fan of raw bodies due to complicated maintenance/storage due to environmental factors (oxidation etc.).
And OP didn't ask for that either

 

[ftumch33]

HA3 as in Olive drab I guess (you know, the Surefire type of HA3) -sometimes looks like olive drab and in extreme cases looks kind of brown but really doesn`t matter as far as Leef bodies go since they all look olive drab.
I`m not aware if that would be considered clear but not a fan or raw.

 

[yazkaz]

HA3 as in Olive drab I guess (you know, the Surefire type of HA3) -sometimes looks like olive drab and in extreme cases looks kind of brown but really doesn`t matter as far as Leef bodies go since they all look olive drab.
I`m not aware if that would be considered clear but not a fan or raw.

The process is called type 3 "Hard Clear" but the ultimate objective is to achieve Olive Drab (natural) shading. However the results depend on various factors such as the quality of the aluminum substrate and the anodizing tank time. At worst the results could turn very pale grey due to the various impurities within the aluminum substrate, esp. high tin content.

The original SF type of HA3 (OD) is confusing. It may not even be Hard Clear at all but instead colored HA3 to mimic the original OD nat look. This is how big companies like SF can cheat a little bit in the process, but with Leef bodies, it's probably real Hard Clear OD nat (which I recall is a bit on the lighter side).

Last year I've requested for colored HA3 anodize on some of the SF 6P bodies (for my annual HA3 reano project) but in the end the plater did Hard Clear on those instead. Most turned out beautifully but a few did end up in very pale light grey, which was unacceptable and subsequently "converted" back to Hard Black which would take about 15 minutes (as long as the bodies are handled properly without finger smudges etc.).

 

[Searchlight]

PM sent regarding Leef 2 x 18650 C Tail E Head black ribbed bodies

 

[ftumch33]

Still looking for a C tail C head!

 

[Greenbean]

I sent a PM...

 

[fivemega]

Looking for these...
C tail M head 2x18650 and 1x18650
C tail C head 1x18650 and 2x18650
and the ever elusive...
C tail E head 1x18650 or 2x18650
HA111 or Black
Still looking for Five Mega bodies.

C tail, C head 1x18650

C tail, E head 1x18650

If you have $urefire M4 you can bore it out for M head, C tail 2X18650

 

[ftumch33]

Thanks for the link Fvemega.
I`ve seen those, just really not digging the style on them.
I had a bored out M4 once. I don`t know what I did with it.
I think I have `gremlins` in the house lol

 

[cernobila]

Hello,

I have some original leef bodies you are after, can send you photos if you wish.....

 

[cernobila]

Just had another look and I have C tail C head 1x18650, and 2x18650 black as well as the E head C tail 2x18650 green........