Sold/Expired Multi Function MegaTinger flashlight by FIVEMEGA

[SIZE=+3]

(AVAILABLE)​

[/SIZE]







Hi folks,
Finally you will have opportunity to have a convertable flashlight from small to medium or large, rechargeable or primary, extra long run time to brilliant bright pocketable light.
Switch housing is seperated from battery barrel and you can choose any size and form of battery barrel for different use.
A set comes with switch housing with installed switch and O'ring, all following battery tubes, C size tail cap, spring, O'ring, A size tail cap, spring, O'ring and rubber sleeve (for 3C)
No head, bulb battery or charger is included in a set.
1C can be used with lithium ion and Strion bulb for long run.
2C can be used with lithium ion and TL-3/1499 bulb for brilliant choice.
3C can be used with NiMH and Strion bulb for extra long run and rechargeable with stock charger in cradle.
Simply add 1C to 3C for 4 cell operation and so on.
4C can be used with Scorpion bulb for 4 hours run time. Axial or WA1319 with HP head.
5C can be used with TL-3/1499 with standard head or US bulb with HP head
6C can be used with WA1274 and HP head.
4x2/3A also can be used with mentioned 4xNiMH operation in smaller package or use 2x18500 li ion with TL-3/1499 with standard head or US bulb with HP head. For emergency or ocasional use, 3 primary lithium 123 is perfect choice.
5x2/3A can be used with TL-3/1499 with standard head or US bulb with HP head. You can also use 2x18650 in this tube for longer run time.
6x2/3A can be used with WA1274 in HP head or 3x18500 with 11 volt axial bulb in standard head or WA1331 in HP head.

The more you play with this flashlight, the more use you will figure out.
Price:
$140 Black or red set
$160 Grey HA III set NOT AVAILABLE
$40 Extra black or red switch housing (with switch and O'ring)
$50 Extra grey HA III switch housing (with switch and O'ring)
$10 Extra black or red "A" size tail cap
$12 Extra grey HA III "A" size tail cap
$22 Standard black head/reflector with installed Boro lens
$32 Standard red head/reflector with installed Boro lens
$28 Black HP head
$32 Fast charger cradle (for NiMH only)
$18 AC 120V power cord (for NiMH only)
$6 UltraStinger bulb (FOR 2 li ion cell HP MODELS)
$6 TL-3 bulb (FOR 2 li ion cell NON HP MODELS)
$9 CA1499 bulb (FOR 2 li ion cell NON HP MODELS)
With purchase of extra switch housing, you will have 2 bodies with different battery configuration.

Shipping:
$10 to States
$18 internationaly
Please post detail of your order here and paypal note.
Please post detail of your order here and paypal note.
Please post detail of your order here and paypal note.
Paypal: [email protected]
Please PM for different payment method.
Any comment welcome.

Standard charger cradle and AC power will work with 3, 4, 5 or 6 NiMH cells.
Fast charger cradle with fast AC power will work with 3, 4, 5 or 6 NiMH cells.
Fast charger cradle with standard AC power will work with 3 NiMH only.

Wow, these are very nice.

What kind of switches are in these? Are they mag switches?

Are the black and red Type II ano?

Thanks

Bogus1 said:

Wow, these are very nice.

What kind of switches are in these? Are they mag switches?

Are the black and red Type II ano?

Thanks

Click to expand...

Switch is Stinger.
Black and red are type II
Grey is type III

I am in for a red set for sure. Before I finalize I need to think about the bulbs I want. Could you tell us about the Nexcell by the 1C. I am not familiar with it.

You referenced c size Li-on cells. Where do we get those?

Hi redbird.

I think that C cell is just a regular Nimh.

Maybe when FM is talking about the 1 C cell light with LIon he's talking about AW's LIon C cells.Just a guess.

Hi FM I also have a question.
When you refer to US bulb do you mean PR base or potted?I don't know that much about (tinger) flashlights.

After looking at this offer does this mean you don't have any heads in HA?

Bigbeam, the US (Ultrastinger) bulb is a bi-pin. PR base and potted bulbs are one and the same.

big beam said:

Hi redbird.

I think that C cell is just a regular Nimh.

Maybe when FM is talking about the 1 C cell light with LIon he's talking about AW's LIon C cells.Just a guess.

Click to expand...

Aw's 'C' LiIon is still WIP. I think FM was referring to the use of an 18500/Pila 150A LiIon in place of a C NiMh cell as they are the same height.

redbird,
Presence of NiMH Nexcell "C" is just for size comparison and ofcourse can be used by LED guys.
AW's lithium ion "C" size batteries are not in market yet.
-------------------
big beam,
Ultra Stinger bulb is not PR potted and can be used in 6 volt Stinger flashlight.
-------------------
My underestanding is Stinger heads (standard or HP) are black HA by factory.
Mentioned red standard heads are reanodized in hard type III
-------------------
lexina,
We all know "C" size lithium ion cells will be reality soon or late.

Sorry, I'm new to this lineup, but does the HP head include a reflector?

-DF

DFiorentino said:

Sorry, I'm new to this lineup, but does the HP head include a reflector?

-DF

Click to expand...

HP head comes with reflector, lens and US bulb.

Is the stock HP lens adequate for all the bulbs you listed or are you adding a boro lens? Thanks

Bogus1 said:

Is the stock HP lens adequate for all the bulbs you listed or are you adding a boro lens? Thanks

Click to expand...

HP lens is good for most bulbs but when you use hotter bulbs such as WA1331, short run won't hurt the lens.
Please check post#19 here.

I think I'm getting this nailed down but I have one more question.Does the HP head and NON HP head use different size bi-pin lamps?You have some bi-pins listed as for HP only and the rest listed for NON HP.I'm thinking they are not interchangable.

I'm a little slow on the uptake :thinking: this is hurting my head!!!

You have the choice of using either standard (non HP) head or HP head but each type of head will work with certain type of bulbs mentioned above.

I want to make sure I understand the charging of these mods. Is it correct that using the various rechargeable batteries that they can be charged in the original stinger charger? We do not need to remove the batteries and charge them in, for example, a pila charger?

HA-III set/switch/tailcap/head/2xHP/bulbs; PayPal sent.

You seem to have forgotten to include a 1x168A and/or 1x150A barrel in the kit . . .

fivemega said:

HP lens is good for most bulbs but when you use hotter bulbs such as WA1331, short run won't hurt the lens.
Please check post#19 here.

Click to expand...

By the way, the URL "here." doesn't work.

Any recommendations for acquiring the charger/cradle sets? I see them for $20 at
http://streamlight-flashlights.com/stinhpac.html

I figure I'll have to hack them to use a more-flexible charging scheme, like hookup
to external "universal" LiIon chargers, etc.

redbird,
Stinger stock charger can be used with NiMH batteries.
To recharge li-ion cells in flashlight, you will need to hook it up to proper charger.
rdh226,
For 1 li-ion cell operation, "C" will serve best.
I hope above link works now.
BTW, I do have some fast chargers too.

Wow they all look very nice, but maybe you should edit the title from megatinger to megastinger.