Beamshots: M@g SSC P7 vs Penta Cree Q2 M@g vs M@g 623

I was bored so i did this, old stuff but hopefully still enjoyable

Mag SSC P7:
2D body
DHS Heatsink
KDs 7135 2.8A driver with 5 modes.
SMO Original Reflector
5AA Sanyo 2700
Glass Lens
KD's CSWOJ SSC P7

Penta Cree M@g
3D Body
10 Sanyo 2700
Maxflex Driver
Glass Lens
5x DX 18mm OP reflectors
Download's Multisink
5x DX Cree Q2 WC LED

M@g 623
D body
Luxluthor's 15.6v 13 cells battery pack
Kiu's High Temp Socket
KDs OP Alu. reflector
Boro Lens
Osram 633 Bulbs(instead of 623) but i still call it 623

Fenix T1 as a baseline. :candle:


SSC [email protected]


Penta Cree [email protected]


623 oo: overexposed.


Different place
SSC P7


Penta Cree Q2, i accidentally moved the camera


623


Thanks.

risky_p,
Thanks for sharing those cool beamshots:twothumbs. The TK1 has no chance against those Mags. Do you have estimate runtimes to compare for those lights?

I'm building a Mag623, Mag1185, and have completed a Mag P7. I may have my lights together by the end of the week and like you, will show off my beamshots then!

Thanks for sharing!!!!

nice rizky thanks! that incan is just awesome!

That was a beautiful garden before you turned it into a scorched desert with that Mag623! Very nice pics.

@uluapoundr:
Mag P7 battery draws: H/M/L = 2.8A/1A/0.5A
Penta Cree Q5 battery draws L5/L4/L3/L2/L1 = 3.2A/1.42A/0.67A/0.31A/0.06A
Mag623 runtime is less then 10 minutes i think.

Penta cree measured using slightly discharged battery pack so the figures are higher than when the battery is full.

Estimated runtime using the above values:
Mag P7 running at High around 1 hour, Low around 4 hours
Penta Cree at Max(L5) is less then one hour, Low(L1) probably around 40 hours


@DM51: Thanks, my favourites are always the "Sisters" that trees are just like twins and almost have the same growth-curves Amazing dont you think?

I guess what this test shows is that if you need less than 10mins of runtime then the Mag623 is the way to go!

warlord said:

I guess what this test shows is that if you need less than 10mins of runtime then the Mag623 is the way to go!

Click to expand...

Yes and also ALOT of heat you cant barely use 623 more than 1 minute at a time. The head will get hot real quick, . :devil: