I can't get enough the vintage fisheye type of flashlights,
now I have several with various upgrades up to 10W halogen E10 & I use them daily, while my MTE P7 becomes a closet queen.
But one light I got recently came in with no bulb, no reflector, not even the bulb holder, just a fisheye lens over an empty tube.
After scratching my head for a while, I come up with the Vintage Q5 Aspheric Mod below. Put a heat sink & driver inside a medium light bulb base, then jamed the whole thing down the tube real deep.
The light looks like vintage 30s or 40s 2C baby style with mini turbo head.
The brand is Novo, which I never heard of.
I had to jam the led down the tube pretty deep,
now there's only room left for 1C. The chip up coverts
1.5V to 3.7v/700mA to the Q5.
This Vintage baby aspheric makes the 2D Mag Aspheric looks like a Giant
Now, the beam shot. The Fisheye lens is not high optically quality,
and it's not eactly the tall the Aspherics shape either.
I can't focus it down to the square chip.
But the outcome is not too bad, I think.
Now, the shoot out with the Aspheric mag.
Left = aspheric Mag, Run on 3W mag LED, not Q5/R2.
Right = Vintage Fisheye, runs on Q5 but lost bunch output due to the lens.
The fisheye aspheric beam isn't a perfect circle, I tried twick it but
limitted by the lower qulity lens, there's nothing I can do.
It looks like the fight is about even.
That's all, Vintage baby aspheric says Good night!
now I have several with various upgrades up to 10W halogen E10 & I use them daily, while my MTE P7 becomes a closet queen.
But one light I got recently came in with no bulb, no reflector, not even the bulb holder, just a fisheye lens over an empty tube.
After scratching my head for a while, I come up with the Vintage Q5 Aspheric Mod below. Put a heat sink & driver inside a medium light bulb base, then jamed the whole thing down the tube real deep.
The light looks like vintage 30s or 40s 2C baby style with mini turbo head.
The brand is Novo, which I never heard of.
I had to jam the led down the tube pretty deep,
now there's only room left for 1C. The chip up coverts
1.5V to 3.7v/700mA to the Q5.
This Vintage baby aspheric makes the 2D Mag Aspheric looks like a Giant
Now, the beam shot. The Fisheye lens is not high optically quality,
and it's not eactly the tall the Aspherics shape either.
I can't focus it down to the square chip.
But the outcome is not too bad, I think.
Now, the shoot out with the Aspheric mag.
Left = aspheric Mag, Run on 3W mag LED, not Q5/R2.
Right = Vintage Fisheye, runs on Q5 but lost bunch output due to the lens.
The fisheye aspheric beam isn't a perfect circle, I tried twick it but
limitted by the lower qulity lens, there's nothing I can do.
It looks like the fight is about even.
That's all, Vintage baby aspheric says Good night!
Last edited: