- Joined
- Sep 16, 2020
- Messages
- 1,005
Not quite a head with two modes or gas pedal, but I've found the Elzetta Hi/Lo tail switch to be highly useful and easy to switch with momentary or click on for constant in both high and low.…Wish I could find a 2 mode head that worked w/ the gas pedal that had a decent tint.
The tails also have a slight slop in them that allows for a pseudo-gas pedal where the tail is tightened to just below full high, light is clicked on to low, and a slight lateral push of the tail puts it in momentary high. Elzetta said this was intentionally designed. I don't usually want the slop, nor do I use the tail like that; so I apply Teflon tape to take up the slack in the threads.
ZFL heads can allow for use of Malkoff drop ins with high CRI.