• You must be a Supporting Member to participate in the Candle Power Forums Marketplace.

    You can become a Supporting Member.

Sold/Expired 4x14670 M*g 1D by Fivemega

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,556
Location
California
4x14670 M*g 1D by Fivemega


C L O S E D

100_1557.jpg




Please read completly before ordering.
All flashlights are already machined and refinished in limited quantity.
I do NOT make, modify or anodize per request.

Hi folks,
Here is another short M*gs in hard anodized or nickel plated 1.25D M*g similar to 4AA in 1D M*g but little longer and designed for 4x14670 lithium ion batteries for 7.4 volt or 14.8 volt operation.
Body is shortened to 1.25D and bored out to accept 4 li-ion 14670 accross and head is fine finned for better heat dissipation. Completly deanodized, highly polished and hard anodized in gold color, red color, purple color or nickel plated.
Battery holder designed to accept 4 li-ion batteries which are slightly gapped to avoid shortage in case battery cover is torn. It has charging jack to recharge batteries without removing batteries from holder or simply remove batteries to recharge individualy. This battery holder has very low resistance and capable of high drain bulbs. Center pin of charging jack is positive and I will include a male charging jack too.
I highly recommend using this charger for quick, safe and easy recharge system without removing batteries.
I offer two different type of battery holders for different use. White serial (14.8V, 1100mAh) or black 2S/2P (7.4V, 2200mAh). You can get either one or both types in any quantity.
You can use WA1111 or ROP LOW with black battery holder or WA1132 with white battery holder.
Moders also can use these as multi LED host.
This flashlight comes with stock switch, reflector and lens. It is highly recommended to use aluminum reflector and boro lens when using high power bulbs.
Please pick next available color and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
For ducumentation purpose, it is extremely necessary and important to mention your CPF ID handle and detail of items in paypal note.
I will never figure out who you are and what for you pay without above information. PM will NOT work. So, please don't forget.
Example:
:paypal: for #38 HA Red 1.25D $80
Black (7.4V) battery holder $40
--------------------------
Price: 1.25D M*g without battery holder $80
White 14.8V battery holder $40 each
Black 7.4V battery holder $40 each
Potted WA1132 $10 each
Bi pin WA1111 $9 each
ROP bulbs $10 pack of LOW and HI
SS bi pin holder $17 each
Brass bi pin holder $14 each
Dual function reflector $25 each
Boro lens $5.50 each
Shipping $8 for 1 set or $10 for 2 sets in States.
Shipping $14 for 1 set international destination.
Paypal: DO NOT PAY
Please PM for different type of payment.
Expect 3 weeks to receive in States or 6 weeks internationally.
Please pick next available color and valid number, post your order here followed by Paypal and indicate detail of your order and your CPF handle in Paypal.
For ducumentation purpose, it is extremely necessary and important to mention your CPF ID handle and detail of items in [SIZE=+1]paypal note[/SIZE].
I will never figure out who you are and what for you pay without above information.

Example:
:paypal: for #38 HA Red 1.25D $80
Black (7.4V) battery holder $40
---------------------
#1 Red HA 1.25D M*g $80 ledaholic paid shipped
#2 Red HA 1.25D M*g $80 LuxLuthor paid shipped
#3 Red HA 1.25D M*g $80 JasonH paid shipped
#4 Red HA 1.25D M*g $80 gsnorm paid shipped
#5 Red HA 1.25D M*g $80 StefanFS paid shipped
#6 Red HA 1.25D M*g $80 Icarus paid shipped
#7 Red HA 1.25D M*g (flutted head) $80 LED Zeppelin paid shipped
#8 Red HA 1.25D M*g (flutted head) $80 LED Zeppelin paid shipped
#9 Red HA 1.25D M*g (flutted head) $80 ifixvws paid shipped
#10 Red HA 1.25D M*g (flutted head) $80 sunshine57 paid shipped
#11 Red HA 1.25D M*g $70 (blemished body) tgiffor paid shipped
---------------------
#1 Purple HA 1.25D M*g $80 LuxLuthor paid shipped
#2 Purple HA 1.25D M*g $80 JasonH paid shipped
#3 Purple HA 1.25D M*g $80 3rdrock paid shipped
---------------------
#1 Green HA 1.25D M*g $80 Nebula paid shipped
#2 Green HA 1.25D M*g $80 JasonH paid shipped
#3 Green HA 1.25D M*g $80 JeffN paid shipped
#4 Green HA 1.25D M*g $80 jefft paid shipped
---------------------
#1 Gold HA 1.25D M*g $80 missionaryman paid shipped
#2 Gold HA 1.25D M*g $80 Kurni paid shipped
#3 Gold HA 1.25D M*g $80 sunshine57 paid shipped
#4 Gold HA 1.25D M*g $80 LED Zeppelin paid shipped
---------------------
#1 Nickel plated 1.25D M*g $80 NetKidz paid shipped
#2 Nickel plated 1.25D M*g $80 Norm paid shipped
#3 Nickel plated 1.25D M*g $80 thomashct paid shipped
#4 Nickel plated 1.25D M*g $80 Chodes paid shipped
#5 Nickel plated 1.25D M*g $80 donn_ paid shipped
---------------------
#1 Chrome plated 1.25D M*g $95 Chodes paid shipped
#2 Chrome plated 1.25D M*g $95 X_Marine paid shipped
---------------------
Any comment welcome.


(CLOSED)
 
Last edited:

NetKidz

Enlightened
Joined
Jun 21, 2006
Messages
569
Location
Taiwan
I'll take:

#1 Nickel plated 1.25D M*g $80
White 14.8V battery holder $40
with international shipping $14
Total $134

Will PP later.

Thanks. :)


EDIT: :paypal:
 
Last edited:

GLOCK18

Enlightened
Joined
Jan 31, 2008
Messages
926
Location
San Diego,Ca
I believe the batteries are about 17mm longer so the body must be closer to that, is this correct FM
 

JasonH

Enlightened
Joined
Feb 10, 2008
Messages
850
PAYPAL SENT FOR

#3 Red HA 1.25D M*g $80
#2 Green HA 1.25D M*g $80
#2 Purple HA 1.25D M*g $80
Shipping est. $12

Total $252

I want to order some battery holders and bulbs, but not sure what i want yet.
Please do not ship until I add those to my order.
If thats OK.
Want to do some LED research. Do you have any suggestions?

Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?
 

fivemega

Flashlight Enthusiast
Joined
Jan 28, 2003
Messages
5,556
Location
California
Want to do some LED research. Do you have any suggestions?

Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?

This is excellent to use with 7.4 volt battery holder.
You may need double click to power up 43 watt bulb using 4x14670
Mentioned bulb is excellent choice to use in 8x14670 flashlights.
 

gsnorm

Newly Enlightened
Joined
Jun 8, 2007
Messages
85
Location
U.S.A.
Hi FM,

:paypal: for #4 Red HA 1.25D M*g $80
Black (7.4V) battery holder $40
Shipping/States $8

Total $128
 

JeffN

Enlightened
Joined
May 13, 2006
Messages
258
Location
Everybody's Hometown
I'll take:
#3 Green HA 1.25D M*g $80

Have to decide how I want to configure it, then I'll finish the order and send PP, no later than tomorrow. This will be a nice addition to the Green 1D received a couple of weeks ago.

Thanks, FM.

Edit: See #17 below for completed order and payment.
 
Last edited:

3rdrock

Enlightened
Joined
Mar 23, 2008
Messages
264
Location
South Florida
#3 Purple HA 1.25D M*g $80
Black 7.4V battery holder $40 each
Shipping $8
$5.50 for the lens
:paypal: total $133.50
 
Last edited:

GLOCK18

Enlightened
Joined
Jan 31, 2008
Messages
926
Location
San Diego,Ca
I use the TerraLUX TLE-300 at 14.8 volts with no issue, I also have the Malkoff quad LED drop in running at 7.4 volts.

PAYPAL SENT FOR

#3 Red HA 1.25D M*g $80
#2 Green HA 1.25D M*g $80
#2 Purple HA 1.25D M*g $80
Shipping est. $12

Total $252

I want to order some battery holders and bulbs, but not sure what i want yet.
Please do not ship until I add those to my order.
If thats OK.
Want to do some LED research. Do you have any suggestions?

Also would i be able to run your 14.8v 43 watt carley bulb with the serial 14.8v holder? For about 22 min run time?
 
Last edited:

jefft

Enlightened
Joined
Aug 30, 2005
Messages
341
Location
Cupertino, CA
Ok, Varooj, I'll come out and play again.
#4 Green HA 1.25D M*g $80

PayPal sent for the above and also for (1) black and (1) white battery holder.
 
Last edited:

DM51

Flashaholic
Joined
Oct 31, 2006
Messages
13,338
Location
Borg cube #51
Paypal sent for:

4x Black (7.4V) battery holders @ $40 = $160
Intl shipping … $12
Total … $172

Thanks!
 

JeffN

Enlightened
Joined
May 13, 2006
Messages
258
Location
Everybody's Hometown
:paypal: for:
#3 Green HA 1.25D M*g $80 JeffN
Black 7.4V battery holder $40 each
Boro lens $5.50 each
Shipping $8 for 1 set... in States

Total $133.50

Thank you, FM.
 

StefanFS

Flashlight Enthusiast
Joined
Oct 12, 2006
Messages
1,262
Location
Silicon Road 1, Sweden
PP has been sent for:
CPFname: StefanFS
#5 Red HA 1.25D M*g $80
4AA battery holder $38 (no batteries included)
Shipping $14 for 1 set international destination.
$132 total.
The 4AA cell carrier option is intentional.

Best Regards,
Stefan
 
Last edited:

JasonH

Enlightened
Joined
Feb 10, 2008
Messages
850
I have decided
PAYPAL SENT FOR

2x white 14.8v holders $80
1x black 7.4v holder $40
1x Potted WA1132 $10

Total $130

Please send these with my other order. Post #8

Thanks, JasonH
FM and GLOCK18 thanks for suggestions on the LED drop ins.
 

mash.m

Enlightened
Joined
Nov 24, 2007
Messages
666
Location
Germany
:paypal: has been sent for:

CPFname: mash.m / sorry but i forgot the nickname at paypal - markus meel
one white 4AA 14,8 volt battery holder $40 (no batteries included)
Shipping $14 for 1 set international destination.
$54 total.

thank you!

markus
 
Top