Only one left ... go get #10 !!
I grayed out the sold items to make this post easier to navigate and indicated price reductions in blue on the rest ... so buy everything now, I don't wanna go to the post office twice !
1) Aleph2 Wiz2 520mA R2H on E2D with 30ohm Trim Tailcap ... SOLD
Warm white tint, no blue or green. One of the famous R2H LuxI LEDs ...
Asking $165
2) DSeck brass E-Series Set ... SOLD
Consisting of:
- UBHII with all available spacers ... $50
- E2C ... $25
- Extender-Set for 1xAA and 1xCR123 for E-Series ... $30
The lot for $95
3) Brass Peak "Disco" Light 1xCR123 7 X RGB-LED ... SOLD
It is a high-power version I had made by the custom design center back then when the RGB wasnt a standard option. The colors start out uniform but quickly disengage into total chaos. A "beamshot":
Asking ... $70
4) Aleph19 UV NG333 on CR2 body with 15ohm Bald Tailcap ... SOLD
Running the Cree 7090UV at 333mA by a NG converter on a CR2 body with a Bald Aleph Tailcap with 15 ohms 2-stage module.
Asking ... $165
5) Jets22 Blackbird with Hangar ... SOLD
Coming with CR2 and CR123 body as well as Hangar and optic and spare lens and the typical 2-stage switch and TinC coating.
BUT ... the split ring has managed to scratch the TiNC surface, looking like this:
No problems otherwise.
Asking ... $150
6) 30mm Tritium Torch ... SOLD
Asking ... $150 (crappy lanyard is free )
7) TiN coated Aleph1 / 1xCR123 / Standard Cap with MJ Superconverter and 4 tritium vials ... SOLD
This is something really special. A TiN coated light. Unfortunately, it has some blemishes, that's why it won't work as a shelf queen and has to go out. During transport to me this beauty has suffered multiple dings on the head and some less on the body and cap. All are small, but they do matter, unfortunately. I tried to capture some of them:
The unit runs a T-bin by a ARCmania SC (about 600mA to the LED), it is white and bright and sports 4 small tritium vials round the emitter:
Asking ... $175
8) ArcAA ... SOLD
Asking ... $50
9) FireFly I ... used ... SOLD
In used conditions with lots of marks and abrasions on the HA ... it spent 8 months on my keychain. Comes with 2-stage switch kit and original sammie (low dome, forgot the rest). Has a low-dome through NX05 beam, but given that set-up, relatively pleasing and "white", but of course not at all perfect.
Asking ... $70
10) Exe head with 5W Royal Blue BB700 by McGizmo ... SOLD
An E-Series head modified by McGizmo to run a RB LuxV at 700mA for either 1x123 or 2x123; here on Aleph 2x123 pack and Trim Tailcap 22 ohms.
It's a Side Emitter and produces a pleasant beam.
Asking for the light ... $155 ... dropped to US$ 140
11) Fenix L1P v2.0 ... SOLD
The initial "low"-powered version with a better runtime. With a scratch:
Comes with lanyard, rubber boot and additional o-ring.
Asking ... $38
12) Microfire Warrior K500 10W HID ... SOLD
Runs a 10W HID on 4xCR123 primaries; size comparison to SF M6 in photo; M6 not supplied
However, an original 10W HID spare bulb is supplied as well as the original packaging and instructions.
Asking ... $200
13) Aleph3 DB917 LuxV on BE4 and Z52-BK ... SOLD
A black Aleph3 head running a LuxV (unknown bin, very white) at 917mA overdrive via a DownBoy current regulator and 4xCR123 in a Balrog 4x123 custom body. Cap is a SF Z52-BK (in HA-II).
The LE is shimmed away from the reflector to avoid beam disturbances.
I glued some small metal parts on the reflector to avoid it moving forward in the head ... not beautiful, but functional. A few scars on the retaining ring have been unavoidable:
The BE4 also came with a minor blemish:
Just for the fun ... a beamshot against a SF U2 (U2 is on bottom):
Asking ... $170
14) Bare aluminium Aleph Tail ... SOLD
Aleph 2x123 body and Standard McE2S 30 ohm in bare aluminium.
Asking ... $50 ... dropped to US$ 40
15) Eternalight EliteMax ... SOLD
NIB ... Asking ... $50 ... dropped to US$ 45
16) LGI-LE ... GONE
One of the first MrBulk lights ... a good-binned (thus the "limited edition") LuxI direct driven by 3xAA in a Legend flashlight. The switch tends to flicker from time to time ... I could almost eliminate it by cleaning, but I think a major cleaning session might be required.
Asking ... a donation to CPF of your personal choice, and it is yours
You can own a piece of CPF history ... and it might be coolest to let a newbie pick this one , to see how it all began ...
17) Arc LS twisty "slim style" ... SOLD
Asking ... $17
18) Schulzendorf Gamma 1 ... SOLD
A rare and former very very expensive light driving a LD LuxI with 2x123, using a head twisty with an interesting contact method. It should be resistored and not regulated.
I replaced the optic with a so17xa reflector:
Asking ... $50
Terms and Conditions
First unconditional "I'll take it" in this thread takes precedence over PMs and questions.
Payment via PayPal only, CC or cash.
Asking price includes all PayPal fees and shipping costs to anywhere on this globe, as long as the German Post can reach it. The packages will be mailed uninsured airmail as insurance would add ridiculous cost.
I shall not be held responsible for items lost in the mail.
All items are mint/near mint except otherwise noted.
There ain't no guarantee, but I did my very best to describe the items as they really are.
bernie
EDIT: I grayed out the sold lights to make this post easier to navigate and dropped the prices on the rest ... see blue prices
I grayed out the sold items to make this post easier to navigate and indicated price reductions in blue on the rest ... so buy everything now, I don't wanna go to the post office twice !
1) Aleph2 Wiz2 520mA R2H on E2D with 30ohm Trim Tailcap ... SOLD
Warm white tint, no blue or green. One of the famous R2H LuxI LEDs ...
Asking $165
2) DSeck brass E-Series Set ... SOLD
Consisting of:
- UBHII with all available spacers ... $50
- E2C ... $25
- Extender-Set for 1xAA and 1xCR123 for E-Series ... $30
The lot for $95
3) Brass Peak "Disco" Light 1xCR123 7 X RGB-LED ... SOLD
It is a high-power version I had made by the custom design center back then when the RGB wasnt a standard option. The colors start out uniform but quickly disengage into total chaos. A "beamshot":
Asking ... $70
4) Aleph19 UV NG333 on CR2 body with 15ohm Bald Tailcap ... SOLD
Running the Cree 7090UV at 333mA by a NG converter on a CR2 body with a Bald Aleph Tailcap with 15 ohms 2-stage module.
Asking ... $165
5) Jets22 Blackbird with Hangar ... SOLD
Coming with CR2 and CR123 body as well as Hangar and optic and spare lens and the typical 2-stage switch and TinC coating.
BUT ... the split ring has managed to scratch the TiNC surface, looking like this:
No problems otherwise.
Asking ... $150
6) 30mm Tritium Torch ... SOLD
Asking ... $150 (crappy lanyard is free )
7) TiN coated Aleph1 / 1xCR123 / Standard Cap with MJ Superconverter and 4 tritium vials ... SOLD
This is something really special. A TiN coated light. Unfortunately, it has some blemishes, that's why it won't work as a shelf queen and has to go out. During transport to me this beauty has suffered multiple dings on the head and some less on the body and cap. All are small, but they do matter, unfortunately. I tried to capture some of them:
The unit runs a T-bin by a ARCmania SC (about 600mA to the LED), it is white and bright and sports 4 small tritium vials round the emitter:
Asking ... $175
8) ArcAA ... SOLD
Asking ... $50
9) FireFly I ... used ... SOLD
In used conditions with lots of marks and abrasions on the HA ... it spent 8 months on my keychain. Comes with 2-stage switch kit and original sammie (low dome, forgot the rest). Has a low-dome through NX05 beam, but given that set-up, relatively pleasing and "white", but of course not at all perfect.
Asking ... $70
10) Exe head with 5W Royal Blue BB700 by McGizmo ... SOLD
An E-Series head modified by McGizmo to run a RB LuxV at 700mA for either 1x123 or 2x123; here on Aleph 2x123 pack and Trim Tailcap 22 ohms.
It's a Side Emitter and produces a pleasant beam.
Asking for the light ... $155 ... dropped to US$ 140
11) Fenix L1P v2.0 ... SOLD
The initial "low"-powered version with a better runtime. With a scratch:
Comes with lanyard, rubber boot and additional o-ring.
Asking ... $38
12) Microfire Warrior K500 10W HID ... SOLD
Runs a 10W HID on 4xCR123 primaries; size comparison to SF M6 in photo; M6 not supplied
However, an original 10W HID spare bulb is supplied as well as the original packaging and instructions.
Asking ... $200
13) Aleph3 DB917 LuxV on BE4 and Z52-BK ... SOLD
A black Aleph3 head running a LuxV (unknown bin, very white) at 917mA overdrive via a DownBoy current regulator and 4xCR123 in a Balrog 4x123 custom body. Cap is a SF Z52-BK (in HA-II).
The LE is shimmed away from the reflector to avoid beam disturbances.
I glued some small metal parts on the reflector to avoid it moving forward in the head ... not beautiful, but functional. A few scars on the retaining ring have been unavoidable:
The BE4 also came with a minor blemish:
Just for the fun ... a beamshot against a SF U2 (U2 is on bottom):
Asking ... $170
14) Bare aluminium Aleph Tail ... SOLD
Aleph 2x123 body and Standard McE2S 30 ohm in bare aluminium.
Asking ... $50 ... dropped to US$ 40
15) Eternalight EliteMax ... SOLD
NIB ... Asking ... $50 ... dropped to US$ 45
16) LGI-LE ... GONE
One of the first MrBulk lights ... a good-binned (thus the "limited edition") LuxI direct driven by 3xAA in a Legend flashlight. The switch tends to flicker from time to time ... I could almost eliminate it by cleaning, but I think a major cleaning session might be required.
Asking ... a donation to CPF of your personal choice, and it is yours
You can own a piece of CPF history ... and it might be coolest to let a newbie pick this one , to see how it all began ...
17) Arc LS twisty "slim style" ... SOLD
Asking ... $17
18) Schulzendorf Gamma 1 ... SOLD
A rare and former very very expensive light driving a LD LuxI with 2x123, using a head twisty with an interesting contact method. It should be resistored and not regulated.
I replaced the optic with a so17xa reflector:
Asking ... $50
Terms and Conditions
First unconditional "I'll take it" in this thread takes precedence over PMs and questions.
Payment via PayPal only, CC or cash.
Asking price includes all PayPal fees and shipping costs to anywhere on this globe, as long as the German Post can reach it. The packages will be mailed uninsured airmail as insurance would add ridiculous cost.
I shall not be held responsible for items lost in the mail.
All items are mint/near mint except otherwise noted.
There ain't no guarantee, but I did my very best to describe the items as they really are.
bernie
EDIT: I grayed out the sold lights to make this post easier to navigate and dropped the prices on the rest ... see blue prices
Last edited: