charger recommendation

[Metatron]

morning all, im keen on a charger that will charge correctly Nimh as well as Li ion batts. dont mind spending on a quality product that actually gives a true reading of the situation. must be able to connect to 220v wall socket. ur recommendations please would be great:thumbsup:

cheers
steve

 

[Norm]

Hi Steve you might limit yourself by specifying 220V most of the better chargers require 12V a small 12V power supply isn't too expensive.
This should run most chargers http://www.jaycar.com.au/productVie...&pageNumber=&priceMin=&priceMax=&SUBCATID=381
Norm

 

[Metatron]

Hi Steve you might limit yourself by specifying 220V most of the better charges require 12V a small 12V power supply isn't too expensive.
This should run most chargers http://www.jaycar.com.au/productVie...&pageNumber=&priceMin=&priceMax=&SUBCATID=381
Norm

thanks for that, i can see ur point here, so yes, a 220v supply isnt a requirement here thanks Norm

 

[Metatron]

any thoughts on this item?

http://www.hobbycity.com/hobbycity/...ion_BC-8_Balancing_Nicad/NIMH,_Lipoly_Charger

 

[Metatron]

http://www.hobbycity.com/hobbycity/store/uh_viewItem.asp?idProduct=6463

gone with ur first recommendation Norm, found an old Dell 5A power supply, so im ready to roll