george tichbourne
KNIFEMAKER
I thought that a new thread would be in order at this point.
The forum knife to Nick's specs is finally priced out and ready for production.
The blade will be 3/16", 440C, cut from a 7 1/4" X 1 1/2" bar, heat treated to Rc 56-58 cryogenically treated, and bead blasted. Handle holes are 3/4" diameter with 1/4" pins and thong tube. Handle material is 1/4" Indigo Blue diamond wood pinned and epoxied in place. Sheath is a simple neck sheath made from black micarta.
Price will be $142 US ~ $142 CDN plus applicable taxes. Shipping extra, we ship Express Post because it's traceable.
Pricing is based on a minimum of 40 knives in order to keep costs down re handle material, logo engraving and steel. (set up charges and shipping costs increase with smaller volumes thereby raising the final price of the knife)
If someone like Schiez will volunteer to organize the numbering I would appreciate it.
When orders are placed I would appreciate them emailed to me directly and there will be a $50 deposit required. Please include your phone # because I will call you for credit card #s.
George Tichbourne
www.tichbourneknives.com
sales@tichbourneknives,com
905 670 0200
Sequential numbering will be stamped on all knives so special numbers must be noted on your order if required. In case of two people wanting the same number the first one in will get it and the second one will get an email. Higher numbers therefor will take longer to be completed.
CFP markings will be laser etched on all knives on the left side ahead of the handle scale.
The forum knife to Nick's specs is finally priced out and ready for production.
The blade will be 3/16", 440C, cut from a 7 1/4" X 1 1/2" bar, heat treated to Rc 56-58 cryogenically treated, and bead blasted. Handle holes are 3/4" diameter with 1/4" pins and thong tube. Handle material is 1/4" Indigo Blue diamond wood pinned and epoxied in place. Sheath is a simple neck sheath made from black micarta.
Price will be $142 US ~ $142 CDN plus applicable taxes. Shipping extra, we ship Express Post because it's traceable.
Pricing is based on a minimum of 40 knives in order to keep costs down re handle material, logo engraving and steel. (set up charges and shipping costs increase with smaller volumes thereby raising the final price of the knife)
If someone like Schiez will volunteer to organize the numbering I would appreciate it.
When orders are placed I would appreciate them emailed to me directly and there will be a $50 deposit required. Please include your phone # because I will call you for credit card #s.
George Tichbourne
www.tichbourneknives.com
sales@tichbourneknives,com
905 670 0200
Sequential numbering will be stamped on all knives so special numbers must be noted on your order if required. In case of two people wanting the same number the first one in will get it and the second one will get an email. Higher numbers therefor will take longer to be completed.
CFP markings will be laser etched on all knives on the left side ahead of the handle scale.
can't remember the last time I washed then .......
