Help With Project RGB Wall Washing Fixture

[nitzer]

I have had this idea for a wall washing fixture for some time. I finally now have started looking into designing it.

I have been doing a lot of research... The more I find the more confused I get. I checked out the welcome mat that was pretty helpful.

What I am looking to do is have 6 x 1 Watt Red LED's, 6 x 1 Watt Blue LED's and 6 x 1 Watt Green LED's for a total of 18 1 Watt LED's in a 12" enclosure each LED would use a Lense.

I would like to control it with a Remote Control


The power would come from a 12Volt 2.2 AH Battery

I just need an idea of what products (drivers, wiring, resistors) I would need to make this idea a reality. I just cant seam to get this thing rolling.

I am learning more everyday just not as fast as my ideas lol

Any help would be greatly appreciated.

 

[nitzer]

I am also looking at the possibility to have someone build me the LED portion of the unit. If anyone is interested in this please email me at [email protected]

 

[R33E8]

Well, I think you could use this for the lens :

http://www.cutter.com.au/proddetail.php?prod=cut718&cat=45

It says it has good color mixing performance which is what I think you would want. Plus it comes in different angles if you want more of a flood effect...

You can use their universal board PCB to mount what ever LED's you want or you can buy them already mounted with a set of red, green, and blue Cree LED's...
http://www.cutter.com.au/proddetail.php?prod=cut717&cat=45

 

[nitzer]

Thanks for the information

 

[R33E8]

I found a RGB controller with IR support in the UK:

http://www.ledverkoop.nl/component/option,com_virtuemart/page,shop.browse/category_id,72/Itemid,26/

They also have a cheaper 1 watt RGB led and lens setup:
http://www.ledverkoop.nl/component/...acturer_id,0/option,com_virtuemart/Itemid,26/

I'm sure there are many more options... I found that in a quick search..