JETBeam RRT-0 Overview With Lots of Pictures

bondr006

Flashlight Enthusiast
Joined
Apr 30, 2007
Messages
2,112
Location
Cary, NC - Land of the CREE
I got my JETBeam RRT-0 Raptor today.
dancinguy.gif
All I can say is
bowdown.gif
to JETBeam! This thing is a beauty....A work of art....No! A Picaso, a Rembrant, A friggin' Masterpiece! What a compliment and wonderful addition to the Raptor family of lights. An EDC to behold...And I could go on. But really....A one cell light that can put out 240 lumen....just like its bigger brothers. That is phenomenal! It has the same feel of quality and craftsmanship that we all have come to expect from the JETBeam company. It utilizes the same UI as its siblings...That being the Rapid Response Ring to change the levels, and a momentary forward clicky to activate it. It has a total of 5 settings from a high of 240 lumen with the Lithium rechargeables, and 180 lumen with an alkaline or nihm AA...to a user changeable low of 10 lumen or a low low of 1 lumen. This light will be at home loose or clipped in your pocket as well as in a holster on your belt.

EDIT: Outdoor beam shots added below....


Specification:

  • Model: JETBeam RRT-0 (R2) Flashlight
  • Specially designed for Military, Law Enforcement, Self-defense, Hunting, Search & Rescue, and the Outdoorsman.
  • The Rapid Response Control Ring allows the user to easily select different brightness levels.
  • Five levels of brightness to choose from
  • Optional low/lower low mode
  • Stainless steel rapid response control ring, very reliable and durable
  • Stainless steel bezels protect the head and tail cap from drops and impacts
  • Stainless steel crenelated bezel can be used as a glass breaker or defensive tool
  • CREE R2
  • LED Input voltage for RRT-0 is 0.8-4.2V
  • Max output reaches 240 lumen with an effective range of 200 meters
  • New hybrid reflector specially designed for CREE LED, which allows for better beam quality, efficiency and throw capability
  • Newly designed high efficiency broad voltage drive circuit
  • Compatible with AA NiMH, CR123, RCR123 and 14500 rechargeable Li-ion batteries
  • Floating positive end, designed for better contact
  • Built-in intelligent Li-ion rechargeable batteries protection circuit
  • Able to Tail stand
  • Impact-resistant accords with US MIL-STD-810F
  • IPX 8 standard waterproof
  • Dimension: Head/Tail Diameter 25.4 mm, Tube Diameter 20.5mm, Total Length 97mm
  • Weight: 86g
Output & Runtime:

Using CR123, RCR123, or 14500 Li-ion Battery

  • High Mode 240 Lumen, 45 min
  • Daily Mode 50 Lumen, 7.5 hours
  • Mid Mode 25 Lumen, 12 hours
  • Low Mode 10 Lumen, 20 hours
  • Lower low Mode 1 Lumen, 100 hours

Using AA Battery
  • High Mode 180 Lumen, 45 min
  • Daily Mode 50 Lumen, 5 hours
  • Mid Mode 25 Lumen, 10 hours
  • Low Mode 10 Lumen, 15 hours
  • Lower Low Mode 1 Lumen, 80 hours
Stay tuned for some photos shortly....Did I say I just love this light? And also, a huge thank you to Jay and Ethan at LightJunction.

OK...Get ready. Here come the pictures....Enjoy!

EDIT: Outdoor beam shots added below....


Dsc01565.jpg


Dsc01566.jpg


Without AA Extender
Dsc01567.jpg


With AA Extender
Dsc01568.jpg


RRT-0, RRT-2, RRT-1 Raptor Family Shot
Dsc01569.jpg


Milky ME1B Transformer, NDI, RRT-0, LF3XT
Dsc01577.jpg


Dsc01575.jpg


Dsc01576.jpg


Without AA Extender - Just under 10cm or about 3 3/4 inches
Dsc01578.jpg


With AA Extender - About 11.5cm or 4 1/2 inches
Dsc01579.jpg


I finally got some night time beam shots in my back yard for y'all. It is about 40 feet to the corner of the fence. All lights are on high setting.

The Playing Field
BackYard.jpg



The RRT-0 is using the smooth Hybrid reflector and protected AW RCR123A in all shots. All other lights are using
protected AW Lithium rechargeable battery's also.


RRT-0andRRT-1.jpg


RRT-0andRRT-2.jpg


RRT-0andJetlllProST.jpg


RRT-0andSFE2DL.jpg


RRT-0andSF-MilkyME1B.jpg


RRT-0andSFG2WolfeyesQ5.jpg


RRT-0andDBSV2Q5OPReflector.jpg


RRT-0andNDI.jpg


RRT-0andLitefluxLF3XT.jpg


High - 240 Lumen - 45 Minutes
Dsc01570.jpg


Daily Use - 50 Lumen - 7.5 Hours
Dsc01572.jpg


Mid Mode - 25 Lumen - 12 Hours
Dsc01573.jpg


Low Mode - 10 Lumen - 20 Hours
Dsc01573.jpg


Lower Low Mode - 1 Lumen - 100 Hours
Dsc01574.jpg
 
Last edited:
Re: Got my JETBeam RRT-0 Today

Looking forward to some beamshots... Even better: outdoor beamshots!

By the way, have you tested it on CR123 primaries?

Thanks in advance.
 
Re: Got my JETBeam RRT-0 Today

Great looking light...but it looks almost big enough to hold TWO CR123.
 
Re: Got my JETBeam RRT-0 Today

Looking forward to some beamshots... Even better: outdoor beamshots!

By the way, have you tested it on CR123 primaries?

Thanks in advance.

Not outdoor shots yet, but I will. Going to bed soon. I'm old, it's raining, and it's after 11pm, and 6am comes early....:laughing:
 
Last edited:
Re: Got my JETBeam RRT-0 Today

Will it tailstand without the rubber button making it lean to one side?
 
Re: Got my JETBeam RRT-0 Today

Hows the clip....will it hold the light on a belt......never really liked clips that just wrap around the body tube. Sometimes i tend to bump into things and my phone meets the floor....i tend to use holsters because of this.
 
Re: Got my JETBeam RRT-0 Today

Congratulations, that is one fine looking Jetbeam. It really does compliment the Raptor series indeed. Enjoy!
 
Re: Got my JETBeam RRT-0 Today

Unfortunately the rubber just barely makes contact with the table surface, and it leans ever so slightly. Nothing extreme for sure.
ah crap. i dont know why its so hard to get this right. Jetbeam even specifies that it will tailstand....
i just dont get it!!!
 
Re: Got my JETBeam RRT-0 Today

Hows the clip....will it hold the light on a belt......never really liked clips that just wrap around the body tube. Sometimes i tend to bump into things and my phone meets the floor....i tend to use holsters because of this.

The clip needs some work for sure. Seems like it was an afterthought. If I use it, it will be clipped down in my pocket. I will probably holster it though. The clip looks and feels like it could detach from the light. Hopefully they will come out with something better.
 
Re: Got my JETBeam RRT-0 Today

ah crap. i dont know why its so hard to get this right. Jetbeam even specifies that it will tailstand....
i just dont get it!!!

It does tail stand. I don't feel like taking any more pictures tonight, but I will add one of it tail standing tomorrow. Bed time guys. :tired: See you tomorrow...
 
Last edited:
Top