Hi guys,
The LED series are going to be released this week and product photos and details are going online within a few days.
I'll also wish that the LF led drop-ins fits WE D26 lights.
We actually made the initial test versions that fit the WE D26 lights, but the results were not satifactory as the reflector were too shallow and there is no room to improve.
We can still acheive better spot then the original WE D26 LED, but it was much too floody for our taste and the hotspot looks even dimmer then a P4 while using an R2 because it was so floody. So we had to ditch the initial design because we think it was not good enough and in order to improve it, we must sacrifice the competibility.
And yes, the D26 and D36 are both 3.6V to 13V regulated input with the sweet spot at 4.5-7.2V. The maximum current output is a solid 1000mA.
We could make the current output higher such as 1200mA, but test results have indicated that the difference in output is minimal and cause severe shortening of the LED's life.
Cheers,
Mark