McClicky For C Series?

[adamlau]

Something w/o the scalloped tail of the Leef version. I saw a few at TnC, but those appeared to be E series only.

 

[Gimpy00Wang]

On a related note...any way to put a McClicky switch in a Z58/Z59?

- Chris

 

[McGizmo]

The McClickie will fit in the original E LOTC cap. Is that the Z57? As for working in a classic tail cap or SF clickie tail cap, some modifications would be required. :shrug:

 

[TxTroubleMaker]

These were made by RPM a while back in Black and HA Nat. which uses the McClickie switch, they fit C-series bodies and some of the Leef bodies. This particular one has slots milled in it for trit vials and is being used on my 27LT-S head with a Leef 18650 27LT body. Don't know if this is anywhere near what you're looking for, but I thought I would throw this one out there for you...

 

[adamlau]

I posted my interest regarding that very tailcap in the RPM clicky thread at Flashlight-Forums about a month ago. No response as of yet :mecry:

 

[TxTroubleMaker]

I posted my interest regarding that very tailcap in the RPM clicky thread at Flashlight-Forums about a month ago. No response as of yet :mecry:

Try a WTB thread over on the Custom BST forum here, it worked for me. Just be patient...

 

[RPM]

I posted my interest regarding that very tailcap in the RPM clicky thread at Flashlight-Forums about a month ago. No response as of yet :mecry:

Sorry must have missed it.. PM sent..

I have a new run just about ready for plating. I will have black and natural (dark green) hard anodize available. This run will be less the trit slots. Hopefully, I can list these on B/S/T in 2-3 weeks.

R-

 

[adamlau]

Yay :twothumbs ! Now my SF Legos will be limited to only SF bezels and beam diffusers. Additional knurling on the threaded section would be nice ...