P2DCE Q5 Reiew with Beamshots

rockz4532

Enlightened
Joined
Sep 7, 2008
Messages
760
Location
St. Louis, MO
The Fenix P2D CE Q5 is a 1x CR123A Flashlight that has 6 output levels with a CREE XR-E Q5 LED. low is 12 lumens, then medium 55 lumens, then high 107 lumens, then 180 lumens for turbo. On low battery life is 30 hours, med is 5.5 hours, high is 2 hours, and turbo is 1 hour. This light is very well machined, no sharp edges, annodizing is flawless. The light outperforms all of my lights, in terms of brightness. it starts on low, then medium, then high, then SOS, then if you twist the bezel, it goes to turbo and strobe. This light, despite little knurling, is pretty easy to hold, it wont fall out of your hand, and it is just long enough to fit in your hand. One thing i noticed was that for turbo, you need to screw it down pretty tight, and im worried that turbo will not work in a couple months. It has full regulation, and will stay at full brightness for the length of the batterys.

All beamshots taken at 40 in a completely dark room, with a canon Digital EOS rebel XT on manual
Beamshot on low
p2dce001bx5.jpg


Beamshot on Med
p2dce002gi3.jpg


Beamshot on high
p2dce003cu1.jpg


Beamshot on turbo
p2dce004bq4.jpg


Comparison with 3aa minimagled fenix on left, mag on right



p2dce005hz0.jpg


Closeup
2yjodaa.jpg


Bezel close up
s24l5d.jpg


Size comparason to 3aa minimagled
2hq87ly.jpg


Taken apart (as far as i can)
24q3i3k.jpg

This is my first review, so give me some feedback of what i can do better!
 
Last edited:
oh shoot, wrong place to post., no wonder no replys, can mod please move to flashlight reviews sub forum?
 
Last edited:

Latest posts

Top