Surefire 6P Pocket Clip

[Zenster]

I did a search but didn't come up with much...

The SF D2 is a 6P with a pocket clip but it's been discontinued.
And I'm not into holsters much, so I'd like to find a pocket clip for my 6P's.

Has anyone come up with an elegant solution for adding a sturdy pocket clip to a 6P?

 

[glockboy]

This fit.
http://www.lighthound.com/index.asp?PageAction=VIEWPROD&ProdID=3434

 

[Buck91]

It would seem that should fit the G2 also... Would it fit between the head and body (instead of tailcap)?

 

[Jim Holzemer]

The NovaTac will fit both, but bezel down due to smaller diameter @ tail.

Another key is that if either the 6P/G2 has the LOTC it probably won't work unless using an o ring/ glow ring( not sure if that is correct name ). However, if you have a clicky tailcap, it should work fine.

I'm using the Leef hex body tailcap w/ both a 6P & a G2 and the clip is solidly in place on the lights. Some folks have drilled/ attached clips, but this proved to be a quick solution that works great.

 

[58sniper]

I've put them on all of my 6Ps, and love them - regardless of the tailcap.

Certainly one of the best changes I've made to the flashlights.

 

[precisionworks]

The outside diameter of the 6P body, where the lanyard ring rides, is 0.872".

The inside diameter of the 120P clip ring is 0.948".

The 120P clip will fit on a 6P, just as my size 12 feet will fit in size 15 shoes - it slides around quite a lot.

FWIW, the Surefire lanyard ring has an ID of 0.884". To get a clip to fit the 6P body, you'll want to find something close to 0.884".