niner
Enlightened
AW, how much current can the switch handle? Is 10A out of question?
Thanks.
Thanks.
You can become a Supporting Member.
AW, how much current can the switch handle? Is 10A out of question?
Thanks.
senna94,
Yes, I have some in stock.
Thanks!
AW
AW, will this switch work in an early build 3C Mag? The light in question was built in the early 80's; it doesn't have the C in front of the serial number.
Also, has anybody tried 2x18650's in a 3C body and this driver?
:thanks:
Thanks, Senna, but I'm wondering about the 3c body version of this build (not the 2c).I am currently running 2 X 18650s in a 2C body and they fit perfectly without the spring. Of course I had to sand down a piece of PVC pipe to make it fit perfectly so the 18650 do not rattle.
Thanks, AW. I'll think about it some more and will let you know. If I decide to do it, I'll probably need some more 18650s as well.greenLED,
It won't fit the older Mag C with the retaining ring holding the switch. You can still install the switch without using the retaining ring but you 'll have to roll up some aluminium foil around the top portion of the switch to hold it in position.