freeman4ever
Newly Enlightened
WTS: Icarus Built, Tri-Cree, Mag2D *pics* ***SALE PENDING***
- Tri-Bored FM 2D with finned head
- Original Bezel and End Cap included
- Ultra Clear Glass Lens 2mm
- (3) Modified McR20 Reflectors
- (3) Cree XR-E P4 WC stars
- Modified PTS2-D Heatsink
- bFlex set at 1A
- Five Levels
- Runs on 6x17500 cells in one FM 6x17500
- (6) 17500 cells included
- One FM 6x17500 carrier included.
Asking : $400, $350, $325 $300 $290 $250 - shipped, with original red bezel and endcap. OR BEST REASONABLE OFFER!
USPS Priority in the CONUS, Hawaii, and Alaska: $9.00
International shipping USPS Global: $20.00
USPS Money Order or Paypal. If paying via PayPal, please pay your pal an additional 4% to cover the fees.
Will not be responsible for parts lost or damaged in the mail.
Registered airmail available for an additional $6.00.
Feel free to ask questions, but an unconditional "I'll take it" takes precedence.
In case you aren't familiar with the bFlex system..... here is the address for the operating instructions. Very simple system once you get the hang of it.
http://www.taskled.com/techbflex.html
Information from the maker, [master] Freddy (Icarus) [/master]:
"The leds are wired in series. When wired in series every led sees the same current (in this case 1A on high).
Estimated (calculated) runtimes (1A drive table) should be as follows:
level 5 (1A): 154 mins.
level 4 (480mA): 230 mins
level 3 (270mA): 410 mins
level 2 (130mA): 851 mins
level 1 (10mA): 11058 mins
Tint is warm white. Beam is large hotspot (= good throw) and a lot of spill.
Believe me it is a very useful light.
- Tri-Bored FM 2D with finned head
- Original Bezel and End Cap included
- Ultra Clear Glass Lens 2mm
- (3) Modified McR20 Reflectors
- (3) Cree XR-E P4 WC stars
- Modified PTS2-D Heatsink
- bFlex set at 1A
- Five Levels
- Runs on 6x17500 cells in one FM 6x17500
- (6) 17500 cells included
- One FM 6x17500 carrier included.
Asking : $400, $350, $325 $300 $290 $250 - shipped, with original red bezel and endcap. OR BEST REASONABLE OFFER!
USPS Priority in the CONUS, Hawaii, and Alaska: $9.00
International shipping USPS Global: $20.00
USPS Money Order or Paypal. If paying via PayPal, please pay your pal an additional 4% to cover the fees.
Will not be responsible for parts lost or damaged in the mail.
Registered airmail available for an additional $6.00.
Feel free to ask questions, but an unconditional "I'll take it" takes precedence.
In case you aren't familiar with the bFlex system..... here is the address for the operating instructions. Very simple system once you get the hang of it.
http://www.taskled.com/techbflex.html
Information from the maker, [master] Freddy (Icarus) [/master]:
"The leds are wired in series. When wired in series every led sees the same current (in this case 1A on high).
Estimated (calculated) runtimes (1A drive table) should be as follows:
level 5 (1A): 154 mins.
level 4 (480mA): 230 mins
level 3 (270mA): 410 mins
level 2 (130mA): 851 mins
level 1 (10mA): 11058 mins
Tint is warm white. Beam is large hotspot (= good throw) and a lot of spill.
Believe me it is a very useful light.
Last edited:
