Please read the entire post 1 before you order!
THE DROP INS IN THIS SALE THREAD ARE VERY HOT! I AM NOT RESPONSIBLE FOR ANY POSSIBLE INJURIES, FIRE HAZARDS OR ANY POSSIBLE MISHAPS. DO NOT ALLOW ANYONE TO OPERATE THESE DROP INs WITHOUT COMPLETE UNDERSTANDING OF THE HEAT RISK AND DANGER INVOLVED. YOU THE BUYER/USER ARE FULLY RESPONSIBLE FOR THE USE OF THE DROP IN SOLD IN THIS THREAD. Please read and follow the warnings in this entire post before purchase. Thank You!
HELLO HELLO HELLO
XML-U2 Run 1: http://www.cpfmarketplace.com/mp/sho...U2-P60-Drop-In
XML-U2 Run 2: http://www.cpfmarketplace.com/mp/showthread.php?6288-9.19.11-Run-2-Modded-XML-U2-1000-Lumen-P60-Drop-in
XML-U2 Run 3: http://www.cpfmarketplace.com/mp/showthread.php?256849-10.3.11-Run-3-Modded-XML-U2-1000-Lumen-P60-Drop-in-DECLARE-WINNER-TONIGHT-12pm
Market Moved to Custom/Here XML-U2 Run 4: http://www.cpfmarketplace.com/mp/s: howthread.php?257414-!!!Moved-to-CPF-
Custom!!!-Run-4-Modded-XML-U2-1000-Lumen-P60-Drop-in-FREE-GIVE-AWAYS
XML-U2 Run4: http://www.candlepowerforums.com/vb/showthread.php?325104-New-Year-SPECIALS!-Custom-P60-XML-1000-Lumen-Drop-in-Warm-Neutral-CoolWhite
How to clean a P60 refelctor: http://www.candlepowerforums.com/vb/showthread.php?330011-vinhnguyen54-How-Clean-A-P60-Reflector
How to wrap a P60 Drop in: http://www.candlepowerforums.com/vb/showthread.php?329978-vinhnguyen54-How-To-Wrap-A-P60-Drop-In
Hello All!
This sale thread for P60 XML drop ins RUN 5. You can refer to the threads above for reference as well as photos.
Here are the general guidelines that applies to all of my P60 XML Drop in
- Please wrap the drop in tightly with aluminum foil before inserting it into your host. PM me if you are unsure how to do this.
- Free Shipping to USA and Canada. Anywhere else add $5 or PM me.
- Please refer to the link above for references
- About 1000 LED Lumen at 4.2A
- When you order please let me know if you want OP or Smooth reflector.
- For direct drive drop in: 3-4.2V Only. Please Use IMR123, IMR14500, and regular 18650. No 26650 or cells that are bigger than 18650 size.
- Thermal Injection by default
- Paypal gift or add 4%. (Please include your CPF name and Shipping address)
- I take money order too
- Orange Peel reflectors has best beam with sacrifice of some throw...my personal recommendation
- Smooth reflectors are great for THROWS but beam profile not as perfect as OP. The reflectors I use allow the LED to go in deeper into the reflectors so the lights focus better
McClicky Switch: $7 each
4 Driving Options are available with each in a different color below
1 Mode Direct Drive Low voltage, cheap, max brightness: 4.2V Max
Solder Filled is an option for direct drive drop in only and it cost $5 extra. Thermal Injection by default for all drop in sold in this thread is solder filled is not bought. Solder Filled greatly help with heat sinking. $35
Multi-Mode High Current & Low Voltage option: 2.7-4.5V max
I have acquired a new regulated driver and it can he program in the following options. When ordering please an option from each of the "Section" below. Also include your name, address, and build order details in your PayPal description. Thanks!
Section 1) LED Choice
Section 2) Current/Amp Choice
Section 3) Program Options
A: Last mode memory
B: No mode memory
1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon
3) High, Medium
4) High, 10hz Strobe
5) Medium, High, 2hz Blink
6) High, Medium, 2Hz Blink
7) Moonlight, Medium, High
8) High, Medium, Moonlight
Section 4) Reflector Choice
AA) Smooth= Best throw, Slight donut hole effect, Most OTF Lumen
BB) Textured Reflector or Orange Peel Reflector = Gorgeous beam, no to minimum donut hole, Less OTF lumen, Less throw,
Price: $45 base price for up to 3,040mA
1 Mode High Voltage & Low Current : 3-18V
- Regulated Single Mode pull 1.5-2.2A Not the brightest options has a big voltage range. Same brightness with 1 li-ion, 2 li-ion 3 li-ion, or 4 li-ion.
Price: $45 with a "Reflector Choice" from section 4 above and free basic thermal injection.
Multi-Mode High Current and Medium Voltage: 2.8-6V
- 2800mA - 5600mA
- Low-Medium-High with memory
- Low-High with memory
- Low-Medium-High-SOS-Strobe with memory
- Low-High-Strobe with memory
$45 based price for 2800mah
1 Mode High Current and Medium Voltage: 2.8-6V
350mah-5600mah
$45based price for 2800mah
I will take Paypal, Checks or Money Order. Thanks!
Paypal Email: [email protected]
If you have any questions Please Ask!
Need XPG, XRE, XPE, SST-50 ... Please PM
Want to see XML Current VS Lumen Charts? Click Here
-------------------------------------------------------------------------------------------------------------------
1.23.2012
Hello all! Today is the first day of Lunar New year. I am Vietnamese, so today is a VERY special day for me. It's the year of the Dragon! Countries that are celebrating this holiday takes up to 2 weeks off just to party, visit distant family members or just to relax. I want to wish everyone the best of health and luck. To start off a fun new year I will be offering the following freebies as random selected gift for anyone who buys a drop in from me starting today until Midnight Friday the 27th!
To make things even more interesting all drop in between now and Midnight Friday will be 10% off!.
Thanks All! And again HAPPY NEW YEAR!
--------------------------------------------------------------------------------
2.6.2012 Update
XML-T6 Sale
I have about 5-8 XML-T6 Bin LEDs for discounted price. According to my light meter through a ceiling bounce test they are about 7-15% less bright compared to the XML-U2. The tint are still pleasantly white. These drop ins will be $15 cheaper than the XML-U2. Let me know if you are interested. OP reflectors are not in yet but should arrive soon.
THE DROP INS IN THIS SALE THREAD ARE VERY HOT! I AM NOT RESPONSIBLE FOR ANY POSSIBLE INJURIES, FIRE HAZARDS OR ANY POSSIBLE MISHAPS. DO NOT ALLOW ANYONE TO OPERATE THESE DROP INs WITHOUT COMPLETE UNDERSTANDING OF THE HEAT RISK AND DANGER INVOLVED. YOU THE BUYER/USER ARE FULLY RESPONSIBLE FOR THE USE OF THE DROP IN SOLD IN THIS THREAD. Please read and follow the warnings in this entire post before purchase. Thank You!
HELLO HELLO HELLO
XML-U2 Run 1: http://www.cpfmarketplace.com/mp/sho...U2-P60-Drop-In
XML-U2 Run 2: http://www.cpfmarketplace.com/mp/showthread.php?6288-9.19.11-Run-2-Modded-XML-U2-1000-Lumen-P60-Drop-in
XML-U2 Run 3: http://www.cpfmarketplace.com/mp/showthread.php?256849-10.3.11-Run-3-Modded-XML-U2-1000-Lumen-P60-Drop-in-DECLARE-WINNER-TONIGHT-12pm
Market Moved to Custom/Here XML-U2 Run 4: http://www.cpfmarketplace.com/mp/s: howthread.php?257414-!!!Moved-to-CPF-
Custom!!!-Run-4-Modded-XML-U2-1000-Lumen-P60-Drop-in-FREE-GIVE-AWAYS
XML-U2 Run4: http://www.candlepowerforums.com/vb/showthread.php?325104-New-Year-SPECIALS!-Custom-P60-XML-1000-Lumen-Drop-in-Warm-Neutral-CoolWhite
How to clean a P60 refelctor: http://www.candlepowerforums.com/vb/showthread.php?330011-vinhnguyen54-How-Clean-A-P60-Reflector
How to wrap a P60 Drop in: http://www.candlepowerforums.com/vb/showthread.php?329978-vinhnguyen54-How-To-Wrap-A-P60-Drop-In
Hello All!
This sale thread for P60 XML drop ins RUN 5. You can refer to the threads above for reference as well as photos.
Here are the general guidelines that applies to all of my P60 XML Drop in
- Please wrap the drop in tightly with aluminum foil before inserting it into your host. PM me if you are unsure how to do this.
- Free Shipping to USA and Canada. Anywhere else add $5 or PM me.
- Please refer to the link above for references
- About 1000 LED Lumen at 4.2A
- When you order please let me know if you want OP or Smooth reflector.
- For direct drive drop in: 3-4.2V Only. Please Use IMR123, IMR14500, and regular 18650. No 26650 or cells that are bigger than 18650 size.
- Thermal Injection by default
- Paypal gift or add 4%. (Please include your CPF name and Shipping address)
- I take money order too
- Orange Peel reflectors has best beam with sacrifice of some throw...my personal recommendation
- Smooth reflectors are great for THROWS but beam profile not as perfect as OP. The reflectors I use allow the LED to go in deeper into the reflectors so the lights focus better
McClicky Switch: $7 each
4 Driving Options are available with each in a different color below
1 Mode Direct Drive Low voltage, cheap, max brightness: 4.2V Max
Solder Filled is an option for direct drive drop in only and it cost $5 extra. Thermal Injection by default for all drop in sold in this thread is solder filled is not bought. Solder Filled greatly help with heat sinking. $35
Multi-Mode High Current & Low Voltage option: 2.7-4.5V max
I have acquired a new regulated driver and it can he program in the following options. When ordering please an option from each of the "Section" below. Also include your name, address, and build order details in your PayPal description. Thanks!
Section 1) LED Choice
- T6 WARM 4000K,
- NEURAL 5000K,
- U2 COOL WHITE 6500K
Section 2) Current/Amp Choice
- I can set the circuit driver from 380mA -5,840mA
- 380ma-3,040mA = Free
- To set from 3,040mA up to 5,840mA please add $1 per 350ma increment
- Example: 3,040mA + 350mA*3= 4,090mA => + $3 to price
- XML produce 1000 LED lumen at around 4,200ma
Section 3) Program Options
A: Last mode memory
B: No mode memory
1) Moonlight, Medium, High, Moonlight, Medium, High, 10Hz Strobe, 2HZ Blink, SOS, Beacon
2) High, Medium, Moonlight, High, Medium, Moonlight, 10Hz Strobe, 2HZ Blink, SOS, Beacon
3) High, Medium
4) High, 10hz Strobe
5) Medium, High, 2hz Blink
6) High, Medium, 2Hz Blink
7) Moonlight, Medium, High
8) High, Medium, Moonlight
- Moonlight 3mA-5mA so its very dim
- Medium = 35% power so it's good for normal use
- High = 100% the current power you choose
- The driver Operates from 2.5-4.5V
- Under 2.8V the output will automatically reduce to 35% and blink once a minute
- 1x Li-ion or 3xNiHM only. 2*CR123 or 2*Li-ion = Poof= Dead Drive/LED
Section 4) Reflector Choice
AA) Smooth= Best throw, Slight donut hole effect, Most OTF Lumen
BB) Textured Reflector or Orange Peel Reflector = Gorgeous beam, no to minimum donut hole, Less OTF lumen, Less throw,
Price: $45 base price for up to 3,040mA
1 Mode High Voltage & Low Current : 3-18V
- Regulated Single Mode pull 1.5-2.2A Not the brightest options has a big voltage range. Same brightness with 1 li-ion, 2 li-ion 3 li-ion, or 4 li-ion.
Price: $45 with a "Reflector Choice" from section 4 above and free basic thermal injection.
Multi-Mode High Current and Medium Voltage: 2.8-6V
- 2800mA - 5600mA
- Low-Medium-High with memory
- Low-High with memory
- Low-Medium-High-SOS-Strobe with memory
- Low-High-Strobe with memory
- I can set the circuit driver from 350mA -5,600mA
- 350ma-2800mA = Free
- To set from 2800mA up to 5,600mA please add $1 per 350ma increment
- Example: 2800mA + 350mA*4= 4,200mA => + $4 to price
- XML produce 1000 LED lumen at around 4,200ma
$45 based price for 2800mah
1 Mode High Current and Medium Voltage: 2.8-6V
350mah-5600mah
$45based price for 2800mah
I will take Paypal, Checks or Money Order. Thanks!
Paypal Email: [email protected]
If you have any questions Please Ask!
Need XPG, XRE, XPE, SST-50 ... Please PM
Want to see XML Current VS Lumen Charts? Click Here
-------------------------------------------------------------------------------------------------------------------
1.23.2012
Hello all! Today is the first day of Lunar New year. I am Vietnamese, so today is a VERY special day for me. It's the year of the Dragon! Countries that are celebrating this holiday takes up to 2 weeks off just to party, visit distant family members or just to relax. I want to wish everyone the best of health and luck. To start off a fun new year I will be offering the following freebies as random selected gift for anyone who buys a drop in from me starting today until Midnight Friday the 27th!
- SST-50, 5.6A, Low-Medium-High, Very Bright, 6V max, Beatiful beam, Nice Cool White Tint, Smooth reflector.
- SST-50, 3.04A, High-Low with memory. Less bright than top drop in. Smooth reflector. Hot Spot is a little purpleish, 4.5V Max.
- XRE-R2 EZ1000 Cutter LED. Smooth, throws good for a P60, 18V max, 1.6A Single mode.
- XRE-R2 EZ1000 Cutter LED. Smooth, throws good for a P60, 4.2V Max 1.75A Single mode.
- XRE Brigthness Bin Unsure but looks like a EZ900 die. Smooth, throws very good for a P60, 4.2V Max 1.75A Single mode. Throws better than 3 and 4.
- XRE-R2 EZ1000 Cutter LED. Smooth, throws good for a P60, 18V max, 1.6A Single mode. Reflector glued to pill.
- Special Mystery
To make things even more interesting all drop in between now and Midnight Friday will be 10% off!.
Thanks All! And again HAPPY NEW YEAR!
--------------------------------------------------------------------------------
2.6.2012 Update
XML-T6 Sale
I have about 5-8 XML-T6 Bin LEDs for discounted price. According to my light meter through a ceiling bounce test they are about 7-15% less bright compared to the XML-U2. The tint are still pleasantly white. These drop ins will be $15 cheaper than the XML-U2. Let me know if you are interested. OP reflectors are not in yet but should arrive soon.
Last edited: