cqbdude Enlightened Joined Jan 13, 2006 Messages 987 Location Kalifornia May 22, 2008 #1 Just checking if the Surefire L1 can handle a RcR123 @3.7 volts..
Valpo Hawkeye Flashlight Enthusiast Joined Jun 17, 2006 Messages 1,266 Location Valparaiso, IN May 22, 2008 #2 Yes, I've used them in my L1 before.
cqbdude Enlightened Joined Jan 13, 2006 Messages 987 Location Kalifornia May 22, 2008 #3 and did it blow up?? How long did you use it on the L1?
Patriot Flashaholic Joined Feb 13, 2007 Messages 11,254 Location Arizona May 22, 2008 #4 I'm not sure if I should be, but they seems to work fine. I use them exclusively in that light now.
2 270winchester Flashlight Enthusiast Joined Aug 9, 2004 Messages 3,983 Location down the road from Pleasure Point. May 22, 2008 #5 i use the Lighthound green Ultrafire 3.0v R123 and it works well, and I don't have to worry about over driving the light.
i use the Lighthound green Ultrafire 3.0v R123 and it works well, and I don't have to worry about over driving the light.
J jzmtl Flashlight Enthusiast Joined Dec 4, 2006 Messages 3,123 Location Montreal, Canada May 22, 2008 #6 I used LiFePO4 rechargeable without any problem, but I don't use them anymore due to their low capacity (500mah at best).
I used LiFePO4 rechargeable without any problem, but I don't use them anymore due to their low capacity (500mah at best).
cqbdude Enlightened Joined Jan 13, 2006 Messages 987 Location Kalifornia May 24, 2008 #7 anyone using AW's rechargeables? I also have a few DLG non protected rechargeables..