Mr_Light
Enlightened
Anyone using the Triple Cree XR-E (on MCPDB)for portable lighting? Not sure if the 50mm Triple optics are appropriate for our purposes. These seem a little pricey (even with the CPF discount), but not having to worry about mounting or alignment would be pretty handy.
Here is a link for the Cutter site which is the only place I have seen these so far. They also have the bare Triple MCPCB.
http://www.cutter.com.au/proddetail.php?prod=cut651
MCPCB - Triple Details
This Metcal core printed circuit board is copper on aluminium and is designed to assist in creating a thermal path to ambient for the complete range of Cree 7090 sized Xlamp product including XR and XR-E xeries Leds. This is designed to be used with most 50mm Triple optics currently available.
Here is a link for the Cutter site which is the only place I have seen these so far. They also have the bare Triple MCPCB.
http://www.cutter.com.au/proddetail.php?prod=cut651
MCPCB - Triple Details
This Metcal core printed circuit board is copper on aluminium and is designed to assist in creating a thermal path to ambient for the complete range of Cree 7090 sized Xlamp product including XR and XR-E xeries Leds. This is designed to be used with most 50mm Triple optics currently available.
