Fenix E01

Status
Not open for further replies.

portezbie

Newly Enlightened
Joined
Apr 30, 2008
Messages
193
just got one of these too there are very nice. Not mindblowingly brighter than the e0's, but they are brighter and much whiter. However, the beam is a bit smaller.
 

mighty82

Enlightened
Joined
Jan 24, 2008
Messages
614
Location
Norway
I find it's much easier to see the difference in ceiling bounce. I can see a major difference between the E0 and E01 then. Much more difference between the E0 and the E01 than it is between the E01 and L1D rebel 100 on low. So it must be close to 10 lumens.
 

mighty82

Enlightened
Joined
Jan 24, 2008
Messages
614
Location
Norway
Haha. I already have black, olive, and another olive on order.:grin2: And when the colors become available, I'm gonna get at least one of each.:whistle:
I have a black and olive one too. I'm going to buy 2-3 more black/olive combos, and keep the best black one and the best olive one. The 2 i have now are good, but the black one is a little ringy on one side of the beam. It just ruins it all for me :mecry:
 

2xTrinity

Flashlight Enthusiast
Joined
Dec 10, 2006
Messages
2,386
Location
California
If you look on this curve from the LED lumen testing thread:

Nichia_NSPW500GS-K1.gif


You will see efficacy is about 95 lm/W at 20mA drive current, which is what the E01 runs at IIRC.

(0.02A)*(3.7V)*(95lm/W) = 7 lumens

In order for the GS to produce 10 lumens, about 35mA drive current would be necessary. That would lead to probably 1/2 battery life on an alkaline, and maybe 90%+ loss in LED life.
 
Last edited:

brucered

Newly Enlightened
Joined
Apr 29, 2008
Messages
36
i have an orange one on the way for my wife. maybe i should have ordered 1 for myself at well.
 

edc3

Enlightened
Joined
Jan 9, 2007
Messages
823
Location
Souptown
My preorder Olive shipped last Saturday, but I've already received a black one. I'm quite happy with it. Small, nicely built, inexpensive, puts out a useful amount of light and great runtime. I'll buy a couple more for myself and several more for gifts.

Here's mine with the Chapstick cap diffuser. :thumbsup:

 

KDOG3

Flashlight Enthusiast
Joined
Aug 4, 2004
Messages
4,240
Location
Sea Isle City, NJ
Just got my Black and Olive today. Meh. Theyr'e ok. But not great. I love the finish, size, and the regulated runtime. The output on the other hand is kinda dissapointing. Really blue and not as bright as I was expecting from all the beamshots and hype. Oh well. I'm using Energizer lithiums in these. I'm gonna have to try that chapstick diffuser trick, looks like it would make and excellent camp/tent light. Still make a good gift for my nurse gf and her 7 yr. old son. I may give her my E1B since I have an E2D LED on the way. We'll see.
 

Fallingwater

Flashlight Enthusiast
Joined
Jul 11, 2005
Messages
3,323
Location
Trieste, Italy
Hasn't anybody cracked open a head yet? This is hard to believe - any cpfer worth his salt would be trying to open the thing as a matter of course. :p
 

Lichtikus

Newly Enlightened
Joined
May 5, 2008
Messages
2
Location
Germany
*NEW* Pocket Clip?

I tried one Fenix clip on my E01. It fit near the head, but would need rebent so it doesn't rub while twisting the head. It wanted to slide off the tail area. It may have just been a loose clip, I don't know. I'm sure I could get it to fit just right with 5 minutes and a pair of pliers if I so desired.

Marduke ... did you use this *NEW* Pocket Clip or the older one? I don't know the old one, and i don't know how "new" it is. Fenix calls it "new".

A Picture would be nice...
 

Probedude

Enlightened
Joined
Jan 10, 2008
Messages
456
Location
Ventura CA
The output on the other hand is kinda dissapointing. Really blue and not as bright as I was expecting from all the beamshots and hype.

Me thinks I'm going to go cancel my order and sit back and watch for a while.

Ooops, too late. The olive one shipped.

Dave
 
Last edited:

kaichu dento

Flashaholic
Joined
Apr 5, 2008
Messages
6,554
Location
現在の世界
Re: *NEW* Pocket Clip?

Marduke ... did you use this *NEW* Pocket Clip or the older one? I don't know the old one, and i don't know how "new" it is. Fenix calls it "new".

A Picture would be nice...
I've got a couple of those and don't think they're up to the quality of the light.

I'm using a clip that has a Browning logo on it which I took off of my Zero Gravity light.
You can kind of see it in my avatar.
 

shadeone

Newly Enlightened
Joined
Apr 20, 2008
Messages
57
since there are so many threads about the E01, I figured Id complile the list of all posts to date about it...

pre-release threads:
http://candlepowerforums.com/vb/showthread.php?t=193197 - Fenix E01, any info? - CandlePowerForums
http://www.cpfmarketplace.com/mp/showthread.php?t=176940 - Fenix E01 - A light for all seasons... - CPFMarketPlace
https://www.candlepowerforums.com/threads/194493 - E0 to E01 conversion *BEAMSHOT pics added* - CandlePowerForums

post-release threads:
https://www.candlepowerforums.com/threads/196564 - Fenix E01 Comparison Review - CandlePowerForums
https://www.candlepowerforums.com/threads/196489 - E01 won't accept my candle mode mod- others have ideas? - CandlePowerForums
https://www.candlepowerforums.com/threads/196285 - Wet blanket on the E01 party - CandlePowerForums
https://www.candlepowerforums.com/threads/195572 - E01 and E0 compare. - CandlePowerForums
https://www.candlepowerforums.com/threads/195899 - I Received My Fenix EO1 Today... - CandlePowerForums
https://www.candlepowerforums.com/threads/195965 - Fenix EO1 Inperfections - CandlePowerForums
https://www.candlepowerforums.com/threads/196078 - My Quick Fenix E01 Review - CandlePowerForums
https://www.candlepowerforums.com/threads/196192 - Fenix E01 - Tighten up head? - CandlePowerForums
https://www.candlepowerforums.com/threads/193424 - UV Fenix E01 [Should they make it?] - CandlePowerForums
https://www.candlepowerforums.com/threads/196814 - fenix e01 vs maglite mini 2aa? - CandlePowerForums
https://www.candlepowerforums.com/threads/196846 - Keychain flashlight battle #2, Fenix E01 Vs Arc AAA.... - CandlePowerForums
https://www.candlepowerforums.com/threads/196985 - YAY, and boo. Got my E01 - CandlePowerForums
https://www.candlepowerforums.com/threads/196985 - Got my E01 - CandlePowerForums
https://www.candlepowerforums.com/threads/197056 - "To Buy or Not to Buy"? EO1 Verdict Still Out - CandlePowerForums
https://www.candlepowerforums.com/threads/197807 - I tried the Fenix E01 lottery and lost
https://www.candlepowerforums.com/threads/197781 - How to mod Fenix E01, UF 602C, Romisen R-1A01 or KD Buckle with colored LED?
https://www.candlepowerforums.com/threads/197871 - Do you think an E01 could be modded with non-Nichia? - CandlePowerForums
https://www.candlepowerforums.com/threads/198002 - Fenix E01 Color Photos Thread - CandlePowerForums
https://www.candlepowerforums.com/threads/198119 - My e01 looks like tish - CandlePowerForums
https://www.candlepowerforums.com/threads/198231 - My Quick Fenix E01 Torture Test - CandlePowerForums
https://www.candlepowerforums.com/threads/198481 - I think my Fenix E01 is... - CandlePowerForums

couple threads on edcforums:
http://edcforums.com/index.php?topic=15941.0 - Fenix Introduces the E01 (AAA light)
http://edcforums.com/index.php?topic=16413.0 - Fenix E01 Wait Thread

shade
 
Last edited:
Status
Not open for further replies.
Top