Sold/Expired FS: Aleph 1 Titanium Bezels

[RPM]

Aleph 1 & McLuxIII-27LT Titanium Bezels


Offered here is a small run of Ti bezels for Aleph 1 heads.
Made from 6AL-4V Titanium and available in three finishes described below.

I also found in the old stash some plain bezels for the original McLuxIII-27LT...

Ordering Info

Payment by PayPal is preferred.... rmcaleve(at)pacbell(dot)net
Shipping with USPS tracking included in price...for usa 50 states
Shipping, Int 1st Class = $16-$23 PM for total



Style 1) TI-1240-410-TC6-075-C
Tapered O.D. Wall, Tall, Crenelated, Extra Chamfers $40.00

Style 2) TI-1240-410-TC6-065
Tapered O.D. Wall, Tall, Crenelated $38.00

Style 3) TI-1240-410-SP
Straight O.D. Wall, Tall, Plain $30.00

And for the Old Timers some plain bezels for the original "McLuxIII-27LT"

Style 4) TI-1370-410-TP
Tapered O.D. Wall, Tall, Plain $30.00

Style 5) TI-1370-410-SP
Sraight O.D. Wall, Tall, Plain $30.00

Finish options:

1) Standard Finish. No Charge, shown above Unless you post otherwise, the finish will be slightly polished.
I use a polishing wheel to remove any sharp edges and it covers the exterior edges quite well.
The inside chamfer will not be polished.

2) Brushed Finish. Add $3, see pic below For a more matte look, I can use ScotchBrite to give the Ti a "grain" or "brushed" look.
This is easy to touch up at home and is closest to the natural machined appearance.

3) Bead Blasted. Add $3 For those who may want it, I can offer bead blasting, for that utility type look.
FYI, once bead blasted, polishing is difficult.

Example of a Brushed "matte" finish.

Thanks for looking!

 

[Scottiver]

Nice! Beautiful job. :twothumbs

 

[Elakazam]

"I´ll take one", please!

Paypal sent for 1x ti-bezel, style 1, and 1x shipping int.

Thanks, Oliver

 

[donn_]

Two of style #1, both brushed finish, please.



:thanks:

 

[RPM]

Elakazam and donn... payments received. I should be able to ship Tuesday.

Thanks.

 

[toby_pra]

does these fit HDS?

 

[darkzero]

does these fit HDS?

Nope. HDS bezel would be equivelent to an Aleph2 bezel.

 

[toby_pra]

Nope. HDS bezel would be equivelent to an Aleph2 bezel.

Ok. But many thanks and soory for hijacking RPM...thought these would fit! :mecry:

 

[RPM]

Ok. But many thanks and soory for hijacking RPM...thought these would fit! :mecry:

I have plenty of bezels that fit HDS lights... I'll send you a PM

R-

 

[RPM]

Elakazam and donn... payments received. I should be able to ship Tuesday.

Thanks.

FYI, These were shipped yesterday.

 

[donn_]

The little lovelies arrived today, and are perfect!

As advertised, they fit Aleph 1 heads perfectly.

They also thread right on to ArcMania's Mega Extreme and Mega Micro, leaving just a tiny gap.

Oddly, they also fit the cheap Chinese LightHound 6P clone bezel with the SS bezel ring, but are faintly smaller in diameter than the head. If I can figure out how to get the ring off a real 6P or 6PD, it wouldn't surprise me if they would fit these as well.

Nice work RPM! :twothumbs

 

[brighterisbetter]

Nice work RPM! :twothumbs

Yep, some great stuff comes out of his shop :thumbsup:

 

[warx23]

Any chance of getting one these with 3 trit slots cut?

rpm. I sent a PM a few days ago

Thanks

 

[criollo]

warx23, nice avatar ! :thumbsup:

 

[Patriot]

Awesome work as usual Richard! Makes me wish I owned an Aleph.

 

[RPM]

Any chance of getting one these with 3 trit slots cut?

rpm. I sent a PM a few days ago

Thanks

Sorry, no time for one off items...

R-

 

[chipwillis]

I'll take a number on, with normal finish. Paypal sent

 

[RPM]

I'll take a number on, with normal finish. Paypal sent

Got your payment.... Thanks!

Our family is going through some grief right now so I may need an extra day or two to get this shipped. :sigh:

I'll do my best to ship it this week. Thanks for your patience...

R-

 

[chipwillis]

No worry, take your time. I hope things get better.

 

[RPM]

No worry, take your time. I hope things get better.

Packaged up and will ship tomorrow (3-25)... Thanks for waiting.

R-