SST-50 EDC 4th Run now *All Shipped*

[fyrstormer]

Re: SST-50 EDC 4th Run now *Open*

In!

Titanium shell, 3-mode 1.4amp driver, 4500k emitter, titanium clip.

Let's see, that's...$341 with insurance.

Does the driver have a low-voltage cutoff so it won't over-discharge unprotected cells? If so, I might change my mind and get the 2.8amp driver instead.

EDIT: ...aaand Paypal sent. Probably premature, but if I missed the boat there's always the refund option, right?

 

[cmacclel]

Re: SST-50 EDC 4th Run now *Open*

The driver has low voltage warning (flashes). That means it's time to re-charge.

Mac

 

[zwerky]

Re: SST-50 EDC 4th Run now *Open*

The driver has low voltage warning (flashes). That means it's time to re-charge.

Mac

awesome, i was just wondering about this.

 

[KenAnderson]

Re: SST-50 EDC 4th Run now *Open*

Mac,

I'm in for Alum 4500k Clip 2800ma

Sent PM requesting address for Postal MO.

Thanks...

Ken

 

[The Voice of Reason]

Re: SST-50 EDC 4th Run now *Open*

If I'm not too late, I'll take a Ti with clip, please
4500K
2800Mah
$13 int shipping.

If I've made it in, please let me know and I will PP $343 immediately.

 

[tino_ale]

Re: SST-50 EDC 4th Run now *Open*

Mac I was wondering if you hit the lights with scotch pad or sand paper after machining ?

If I had the choice I would prefer that mine had a unaltered raw machine finish. Is that ok to ask ?

edit : Ok I've read in the first run thread that you hit lights with scotchbrite in order to get the brushed finish... If you could leave my Ti unit not brushed but raw machine finish it would be much appreciated.

 

[vrocco]

Re: SST-50 EDC 4th Run now *Open*

Is it too late to get in on this? I would like the Al model with clip plus shipping and insurance.

Base Light Bare Aluminum $150
Titanium Clip Option $30
4500k Warm (Top Bin)
3mode Low-Med-2800mah High *IMR CELL REQUIRED Intermittent use on High*
US Shipping $5
Insurance is $3 for Aluminum

Total=$188
::

If it is full already, please just refund the paypal.

 

[abolish]

Re: SST-50 EDC 4th Run now *Open*

I'm in for:

Base Light Bare Aluminum $150
Titanium Clip Option $30
4500k Warm (Top Bin)
3mode Low-Med-2800mah High

 

[brix13]

Re: SST-50 EDC 4th Run now *Open*

Hi Mac,

I'm in.

Base Light Bare Aluminum $150
Titanium Clip Option $30
w/Insurance

4500k Warm (Top Bin)
3mode Low-Med-1400mah High

 

[dom]

Re: SST-50 EDC 4th Run now *Open*

Hi Mac
If OK to PP next Thurs night i'm in for :

Titanium & Clip
4500
L-M-2800H

Thanks again
Cheers
Dom

 

[coloradogps]

Re: SST-50 EDC 4th Run now *Open*

Base Light Titanium $300
6500k Cool (Top Bin)
3mode Low-Med-1400mah High
Titanium Clip Option $30
Shipping $5.00

Total $335.00

Thanks....

 

[kit]

Re: SST-50 EDC 4th Run now *Closed for now*

Hi Mac, I sent you a PM. Is there a spot left? I'm in if there is...

 

[scalez]

Re: SST-50 EDC 4th Run now *Closed for now*

Hi Mac,

I've asked to be included in the 4th run in your 3rd run thread.
Any spot left for me?
Help me... my finger is itching to click "Send Money"!

I'd like:-
Aluminum with Clip
3 mode Low-Med-2800mah High
4500k Warm

US Shipping with Insurance.

Thanks.

 

[hornady708]

Re: SST-50 EDC 4th Run now *Closed for now*

Hey Mac, I'm going to have to pass for now

 

[fyrstormer]

Re: SST-50 EDC 4th Run now *Open*

The driver has low voltage warning (flashes). That means it's time to re-charge.

Mac

Hmm. Okay, next question: what's the estimated difference in brightness between the 1.4A and 2.8A drivers?

 

[csa]

Re: SST-50 EDC 4th Run now *Open*

Nice looking little light. I'll keep an eye out for the next round if I can afford 'em then.

 

[sledhead]

Re: SST-50 EDC 4th Run now *Closed for now*

MAC: Thought I expressed interest for the 4th run but I quess I missed the boat somewhere. If a slot opens up I'd be in for a Titanium 4500k 2.8A version with clip.

 

[pwatcher]

Re: SST-50 EDC 4th Run now *Open*

for:

Base Light Bare Aluminum $150
4500k Warm (Top Bin)
3mode Low-Med-1400mah High
US Shipping $5

Total: $155

I wasn't on reserved list, so hope you have a spot left open for me!
If not, I know you'll simply refund my paypal payment, correct?

Mac, plse update your paid list at top of thread to reflect I asked for a 1400 mah driver, ok? thx!

 

[octaf]

Re: SST-50 EDC 4th Run now *Closed for now*

Wow, this 4th run is filled up in no time.

Amazing !

 

[PolarBearX]

Re: SST-50 EDC 4th Run now *Closed for now*

Mac, gonna have to pass unfortunately, had hoped this would take longer actually...this month with the new dog getting fixed, invisible fence, new exhaust, wife's new ceiling fan, University registration and dorm fees, well, u get the picture. I'll be watching for the possible 18650 option, maybe I can get in on a future run since they're running quick.

I'm sure this will make someone above very happy.

thanks,

PBX lovecpf