What is the smallest single CR123 light?

[wingnutLP]

I tried a search but couldn't find anything what are the smallest and lightest single CR123 lights?

 

[berry580]

Don't know the exact answer, but its rare to go any smaller than Nitecore's EZ123

 

[mikra]

Zebralight H30: 56mm x 25mm, 40g with Battery.

 

[wingnutLP]

Thanks... I will look at the nitecore I like the EZ AA that I have so it may be just the ticket.

It looks like Zebralight have switched everything over to clicky which is a shame as I much prefer the two H50's to the H501 that I have

Are there any really small Ti CR123 lights out there?

 

[300]

fenix p1d

 

[shark_za]

Romisen RC-D6 is very small and as cheap as chips.

 

[erlon]

With the Nitecore EZ123 you can´t com wrong.

You´ll have one of the smallest lights with power and quality.

 

[chef4850]

Take a look at the nitecore extreme (NEX). Great light! Surpurb amount of light for a single cell light. Looks great (my opinion) and decient run time. Infanite brightness setting and strobe (if your into that kind of thing).

Chef

 

[alex_ny]

Deerelight EDC clicky switch

 

[Illum]

fenix p1d

Ah no... Fenix P1 was much smaller than the P1D

 

[Incidentalist]

In addition to the ones already mentioned, Fenix has just released a new/updated model of their P1D called the PD10. As far as the Fenix lights go, the P1 would still be the smallest of the 3 (but only offers one level).

Muyshondt Nautilus would also be a contender in this area. They aren't made anymore, but you can find them in the b/s/t area and it looks like a few vendors still show them available on their sites.

 

[wingnutLP]

I have been happy with the EZ AA so I might give the EZ 123 a go I think.

Unless there are any Ti special edition or custom made lights anyone can suggest...

 

[berry580]

lol, im not sure whether you'd wanna go into the Ti/custom area, its not good for your pocket. =P

Anyway, I haven't eyed on much good ultra compact 1xCR123 lights myself, but i do have a 1xCR2 in mind.

 

[THE_dAY]

4sevens still has the Nautilus Ti.

One of the best single cell cr123 lights made imo.

http://www.4sevens.com/product_info...d=511&osCsid=c379ff159da1692c1d38a34e8bfe857a

 

[dagored]

You said smallest. The Jil Lite Ti CR2 is smaller than the EZ123 by about a half inch, look here:

http://www.cpfmarketplace.com/mp/showthread.php?t=193253

Now, the Muyshondt Nautilus is still available at Brightguy in Ohio. It may be smaller than the Jil Lite.

EDIT: Just ignore this. I was comparing the CR2 versions of the EZ and Jil Lites, brain freeze.

However, the Nautilus is a 123 light.

 

[dagored]

lol, im not sure whether you'd wanna go into the Ti/custom area, its not good for your pocket. =P

Anyway, I haven't eyed on much good ultra compact 1xCR123 lights myself, but i do have a 1xCR2 in mind.

I just clicked on the link you are eyeing up. Go for it. I have had the polished version for about 3 weeks now and I take it everywhere. It is smaller than the EZCR2

 

[kramer5150]

These are the smallest I am aware of (and the cheapest)... 6 bucks for 66mm total length. They should be one of the lightest too with a plastic reflector and front lens.
DX-SKU:2097

DX-SKU:2083

But they are significantly inferior to other cree-based lights in just about every other way I can think of.... (brightness, efficiency, quality...etc...). As with any low$$$ DX purchase, expect to spend some time tweeking and tuning to get light out of them.

 

[recDNA]

I just clicked on the link you are eyeing up. Go for it. I have had the polished version for about 3 weeks now and I take it everywhere. It is smaller than the EZCR2

The 4 mm you save in length cost you 70 lumens and $300 compared to a P1D

 

[dagored]

The 4 mm you save in length cost you 70 lumens and $300 compared to a P1D

Wow, I should sell mine. I only paid $150 for it, so its 80 lumens and $100, but its not titanium.

 

[Vikas Sontakke]

These are the smallest I am aware of (and the cheapest)... 6 bucks for 66mm total length. They should be one of the lightest too with a plastic reflector and front lens.
DX-SKU:2097

DX-SKU:2083

But they are significantly inferior to other cree-based lights in just about every other way I can think of.... (brightness, efficiency, quality...etc...). As with any low$$$ DX purchase, expect to spend some time tweeking and tuning to get light out of them.

DX had this light sold as "pre-modded with a Cree P4" a while ago. They no longer sell them. I have one and it is insanely bright on RCR123. I have never seen anything smaller and brighter at DX/KD since then.

- Vikas