G2Z clickie and LED recommend
- Thread starter phxccw
- Start date
Help Support Candle Power Flashlight Forum
bigchelis
Flashlight Enthusiast
https://www.candlepowerforums.com/threads/217252
Choose wisely, but my vote goes for the Malkoff M60LLF
Choose wisely, but my vote goes for the Malkoff M60LLF
Sgt. LED
Flashaholic
Member Netkidz offered a super easy DIY kit to make your twisty into a clicky.
It works very well. He was selling them in the CPF Custom BST.
He might still be making them but I am unsure.
LED? Malkoff of some type! I'd go with an LL variant because it makes the least heat.
It works very well. He was selling them in the CPF Custom BST.
He might still be making them but I am unsure.
LED? Malkoff of some type! I'd go with an LL variant because it makes the least heat.
*SOLD* custom made forward-clicky switch for SF P/G/C/Z tailcap - CandlePowerForums
Not too sure about them being sold he may still be taking orders, send him a PM.
Norm
Sgt. LED
Flashaholic
More are inbound soon, I just checked. :thumbsup:
bigchelis
Flashlight Enthusiast
I purchased these from DX and the guts just unscrew from it and screw right into the Surefire G2 tail caps. It will make your twistie into a clickie.
http://www.dealextreme.com/details.dx/sku.14024
http://www.dealextreme.com/details.dx/sku.14024
Solscud007
Flashlight Enthusiast
Yep that is what I used fir my G2Z. Only thing is that it is a reverse clicky.
Sgt. LED
Flashaholic
REVERSE! EEEEEWwwwwwwwwwwwww
Hey as long as it works.
bigchelis
Flashlight Enthusiast
REVERSE! EEEEEWwwwwwwwwwwwww
Hey as long as it works.
I have used my DX reverse clickies for about 8 months now and they work awesome with plenty of daily use. I use the P60 P7's, MC-E, M60, and P91.
These clickies just dont quit. I purchased about 10 of them and installed them in my friends and co-workers lights. It allows you to retain the stock look on you 6P and G2 lights and they just don't know when to quit
EDIT: 1 out of my 6 that I use did quit.
, but it was due to 4.5A of current at the tail and it took a while at that.
Sgt. LED
Flashaholic
Malkoffdevices.com
M60L or LL
M60L or LL
Thanks man. $55......damnnnnnnnnn!
Sgt. LED
Flashaholic
I know. $$
It is the best drop-in to buy for a Surefire Nitrolon flashlight however.
Other drop-in's have a reduced lifespan because of heat generation and build up. The M60L is bright and has a good runtime. The M60LL is less bright but there is nearly no heat made and runtime is quite long. The M60 is too hot for your light. My overall favorite is the M60WL. It has a really great tint for using it outside.
You can also get more lumens out the front of your flashlight by buying an AR coated UCL lens from flashlightlens.com. They have a size guide on the site to make sure to get the right one.
It is the best drop-in to buy for a Surefire Nitrolon flashlight however.
Other drop-in's have a reduced lifespan because of heat generation and build up. The M60L is bright and has a good runtime. The M60LL is less bright but there is nearly no heat made and runtime is quite long. The M60 is too hot for your light. My overall favorite is the M60WL. It has a really great tint for using it outside.
You can also get more lumens out the front of your flashlight by buying an AR coated UCL lens from flashlightlens.com. They have a size guide on the site to make sure to get the right one.
Last edited:
I ordered these too but the clickie is too thick to allow my g2 body screw into the G2 cap with the new clickie installed. Did you guys who bought these encounter the same problem?
bigchelis
Flashlight Enthusiast
I get the stock boot from the DX clickie and cut the center protruding rubber nipple in half. It will work 100%, if you have continued problems I can get a video tutorial for you tonight.
good luck,
Jose
Tried that and still not enough threads. I looked at my G2Z and the tail cap is completely different. In fact, I couldn't get the tailcap guts off the G2Z.
Sgt. LED
Flashaholic
You have to take the black threaded ring out of the tailcap first. If you have done that and it still doesn't work then look at the threads and make sure they are 100% clean. If they are clean then we need pics to better help you along.
Perhaps DX has redesigned the clicky you ordered a bit and it is now not compatible.
Perhaps DX has redesigned the clicky you ordered a bit and it is now not compatible.
bigchelis
Flashlight Enthusiast
I just did another one yesterday and stuck needle nose pliers in the wedges to get a grip. Then turn counter clockwise. The needle nose pliers kept sliping, so I drilled two small holes in the black threaded ring so the needle nose plier wouldnt slip as I twisted. It was tought. I had to get a visegrip to hold the tailcap and stuck the needlenose pliers in the newly drilled holes and then it came out. In that past I did about 6 of these with no tools, but this one put up a good fight.
