nailbender
Flashlight Enthusiast
P7, MC-E, UV & Luminus SST-50!!! NEW XPE Modules P60/D26 style drop-ins (part 2)
PART II is now CLOSED PLEASE GO TO (PART III HERE)
This is part 2 continued from (here)
I am offering P60 Style drop ins, they are available with the following leds
Seoul P7 -Cree MC-E - R2 XP-E,XRE - Cree UV - Osram Diamond Dragon - K2 TFFC.
D36 modules are (HERE)
A new offering which is a P60 style Osram Golden Dragon 940nm IR module.
Also now offering Golden Dragon Plus Cool & Warm White are also being offered Details below.
XPE R2 built for 3p or one cell pocket rockets
NEW DIAMOND DRAGON IN RED & GREEN MODULES
I have warm white, neutral white, and cool white bins available in most leds
Picture of emitter & next one is the DD board
Finished top of the module and wall shot.
NEW MODULES DESIGNED FOR XPE
Seoul P7 & Cree MC-E
I have used it on high for about 10 to 15 minutes while taking the dogs out and it gets warm but not uncomfortably so although I am sure extended run times on high would produce hot surfaces.
The different levels are changed readily by a regular SF twisty switch.
I have also started offering other drop ins. The following are now offered.
Cree UV 7090 XLamp high power, these are 395nm and are driven @ 1.2 amps. These are quite strong and appropriate eye protections should be taken. Operating voltage is 3.6 volts to 9 volts.
Cree R2 or GDP - new one cell modules with new boost-buck efficient driver for one cell pocket rockets (3P or such)
Cree R2 XP-E in WD & WC tint is the brightest single die led that cree makes. The newest bins are up to 275 lumen manufacturer rated @ bulb. These are driven @ up 1.2 amps. Operating voltage is 3.6 volts to 6 volts. These will run at full power on one 16340 for up to 1 hour with little dimming. This led has one of the tightest and longest throws.
available in Warm White, Neutral White
Cree R2 XRE are also carried with the above specifications and
options.
Osram Diamond Dragon & K2 TFFC both leds are driven @ 1.5 amps and are rated at 325 plus lumen. The Diamond Dragon is super bright and one of the smoothest , artifact free leds on the market.
The K2TFFC has alot of the same characteristics that the Cree R2 does.
The Diamond Dragon is available in UltraWhite while the K2 TFFC is available in Neutral & Warm bins. Operating voltage is 3.6 volts to 6 volts.
Drop Ins that are availbable NOW!!!
Seoul P7 available in neutral white -- 1 - 3 level and 5 levels. MOP reflectors. Price $65
Cree MC-E available in Warm White - Neutral White - Cool White bins and are available with 1 - 3 & 5 light levels Price $75
Cree XP_E - XRE available in Warm White - Neutral White - Cool White R2 bins and available with one level & a few 3 level modules price $30
K2 TFFC & Diamond Dragon K2 is available in Warm & Neutral White while the Diamond Dragon is available in ultra white only. Both available in one light level . Price is $40 Diamond Dragon also available in RED & GREEN at the same price.
Golden Dragon Plus available in both warm & cool white. These are available in a 3 level for now. The manufacturer rates the cool white @ 105 lumen @ 350ma these are driven at 1.2 amps. Beam is flawless. Price is same as DD $40
Cree UV 7090 XLamp This is basically a q5 UV that I push at about 1.2 amps. They are quite bright. Wavelength is 395 to 400NM Please use adequate eye protection. Price is $45
NEW Golden Dragon 940NM IR module for night vision equipment. Current 1amp
Price is $40
D36 modules are located (HERE)
Price includes shipping Conus Int. quoted.
Please PM for PP info
CC is 4%
Thanks Dave
PART II is now CLOSED PLEASE GO TO (PART III HERE)
This is part 2 continued from (here)
I am offering P60 Style drop ins, they are available with the following leds
Seoul P7 -Cree MC-E - R2 XP-E,XRE - Cree UV - Osram Diamond Dragon - K2 TFFC.
D36 modules are (HERE)
A new offering which is a P60 style Osram Golden Dragon 940nm IR module.
Also now offering Golden Dragon Plus Cool & Warm White are also being offered Details below.
XPE R2 built for 3p or one cell pocket rockets
NEW DIAMOND DRAGON IN RED & GREEN MODULES
I have warm white, neutral white, and cool white bins available in most leds
Picture of emitter & next one is the DD board
Finished top of the module and wall shot.
NEW MODULES DESIGNED FOR XPE
Seoul P7 & Cree MC-E
- This is a Direct Drive with 3 or 5 levels, High, Medium, Low, Strobe, SOS.
- SSC P7 or MC-E driven @ full Power ( 800 to 900 lm)
- P60 style drop in with light to medium orange peel reflector Emitter is perfectly centered.
- Fits any P60 compatible SF products, SF clones are unknown.
- runs on one rcr123, 16340, 14500, 18650, two cr 123
- Voltage is 3.5 to 6 volts.
- Small doughnut but very very little.
I have used it on high for about 10 to 15 minutes while taking the dogs out and it gets warm but not uncomfortably so although I am sure extended run times on high would produce hot surfaces.
The different levels are changed readily by a regular SF twisty switch.
I have also started offering other drop ins. The following are now offered.
Cree UV 7090 XLamp high power, these are 395nm and are driven @ 1.2 amps. These are quite strong and appropriate eye protections should be taken. Operating voltage is 3.6 volts to 9 volts.
Cree R2 or GDP - new one cell modules with new boost-buck efficient driver for one cell pocket rockets (3P or such)
Cree R2 XP-E in WD & WC tint is the brightest single die led that cree makes. The newest bins are up to 275 lumen manufacturer rated @ bulb. These are driven @ up 1.2 amps. Operating voltage is 3.6 volts to 6 volts. These will run at full power on one 16340 for up to 1 hour with little dimming. This led has one of the tightest and longest throws.
available in Warm White, Neutral White
Cree R2 XRE are also carried with the above specifications and
options.
Osram Diamond Dragon & K2 TFFC both leds are driven @ 1.5 amps and are rated at 325 plus lumen. The Diamond Dragon is super bright and one of the smoothest , artifact free leds on the market.
The K2TFFC has alot of the same characteristics that the Cree R2 does.
The Diamond Dragon is available in UltraWhite while the K2 TFFC is available in Neutral & Warm bins. Operating voltage is 3.6 volts to 6 volts.
Drop Ins that are availbable NOW!!!
Seoul P7 available in neutral white -- 1 - 3 level and 5 levels. MOP reflectors. Price $65
Cree MC-E available in Warm White - Neutral White - Cool White bins and are available with 1 - 3 & 5 light levels Price $75
Cree XP_E - XRE available in Warm White - Neutral White - Cool White R2 bins and available with one level & a few 3 level modules price $30
K2 TFFC & Diamond Dragon K2 is available in Warm & Neutral White while the Diamond Dragon is available in ultra white only. Both available in one light level . Price is $40 Diamond Dragon also available in RED & GREEN at the same price.
Golden Dragon Plus available in both warm & cool white. These are available in a 3 level for now. The manufacturer rates the cool white @ 105 lumen @ 350ma these are driven at 1.2 amps. Beam is flawless. Price is same as DD $40
Cree UV 7090 XLamp This is basically a q5 UV that I push at about 1.2 amps. They are quite bright. Wavelength is 395 to 400NM Please use adequate eye protection. Price is $45
NEW Golden Dragon 940NM IR module for night vision equipment. Current 1amp
Price is $40
D36 modules are located (HERE)
Price includes shipping Conus Int. quoted.
Please PM for PP info
CC is 4%
Thanks Dave
Last edited: