using IMR 16340+ spacer for MN61 in a M4

[mikevelarde]

Can I use the above setup for the M4.The tailcap had a AW soft starter installed and I'm concern about the short runtime:thinking:

What sort of runtime can I get with this setup??

Thanks

 

[BSBG]

It should work, for about 10 minutes of run time. Longer on low of course .

 

[mikevelarde]

Thanks BSBG for the reply.

BTW, according to the previous owner, the tube had been bored out to accept AW's 18650. My problem is the lights comes with many NIP MN61 bulb . so I decided to use the MN61 before ordering some LF bulbs.

What will be the outcome when I use 2 IMR18650 to power the MN61:thinking:??

 

[Superdave]

Thanks BSBG for the reply.

BTW, according to the previous owner, the tube had been bored out to accept AW's 18650. My problem is the lights comes with many NIP MN61 bulb . so I decided to use the MN61 before ordering some LF bulbs.

What will be the outcome when I use 2 IMR18650 to power the MN61:thinking:??

Low, the MN61 is a 12V bulb and 2 18650's will run around 8V.

the IMR 18650's should power the MN21 lamp nicely though, i've used it on 2 IMR 16340's and it ran fine.

 

[mikevelarde]

:bow::bow::bow: