Sold/Expired 4AA to 1D, 8AA to 2D, 12AA to 3D M*g

[Hallis]

I really really wish you'd make another run of these. I need at least one 12aa/3d white and 8aa/2d white.

If anybody has these I'd really like to talk about buying them.

 

[fivemega]

[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]

 

[Hallis]

Darn, looks like no White 12AA to 3D (14.4 volt) or White 8AA to 2D (9.6 volt) on this run.

 

[Megatrowned]

I have a question. Is it possible to have a 4 AA to 1 D adaptor that puts out 3V? (Two sets of AA's in parallel) I have a 2 D M*g I would like to have cut down to 1 D, but I still need 3V.

 

[fivemega]

Is it possible to have a 4 AA to 1 D adaptor that puts out 3V?

2S/2P holders are designed for 14670 which are about 67mm long but AA cells are 50mm long
Using 4 standard AA cells with some spacers is possible in 2S/2P holders for 3 volt (nominal) operation. In this case, you will need 4 spacers of 17mm and use inside bored 1.25D.

 

[cdog]

1 4AA white battery adapter 36.00
1 Shipping 7.00

 

[Mr.Brown]

Hello,

I recently acquired an unused short bodied red Elephant II but it has no battery holder. Are they still available? Your assistance would be greatly appreciated.

Mr. Brown in Orange County, California

 

[Minimoog]

Minimoog - Paypal sent for Black 12AA to 3D (7.2 volt)$38 (AVAILABLE)
+ $14 shipping to international destination
Transaction ID 57N78155NR627604C

 

[fivemega]

[SIZE=+2]Some more battery holders available.

Please see post #1 for available battery holders.[/SIZE]

 

[RandyJMP]

Hi, wondering if it's possible to just buy a piece of these. I have an old 2D conversion, the bottom plastic piece has broken. I don't mind buying a complete 8xAA set but I notice the white version is not available anymore, and it seems to be the higher voltage version I need. I would've just sent a PM but don't have enough posts to do that. Policies here are quite a bit more restrictive than they used to be (2009-ish was the last time I was on).

Thanks

Randy

 

[id30209]

Hi, i would also need 8AA for 2D Mag (9,6V) if possible...

Thx

 

[fivemega]

Hi, wondering if it's possible to just buy a piece of these.

Unfortunately, No parts are or will be available for sale or warranty.
Sorry.

Hi, i would also need 8AA for 2D Mag (9,6V) if possible...

As of today, (April 12th-2018) only few 4AA and 16A battery holders are available. Once remaining item sold out, this thread will be closed.
All items listed in post #1 are discontinued and no more will be reproduced.

 

[id30209]

To bad

 

[id30209]

Anyhow, PP sent for 8AA to 2D (4.8V) + international shipping 14$
Total 51$

 

[id30209]

Anyhow, PP sent for 8AA to 2D (4.8V) + international shipping 14$
Total 51$

FM, is there any info on this one: built, shipped etc?

 

[fivemega]

FM, is there any info on this one: built, shipped etc?

[SIZE=+2]Please allow 7 days to ship[/SIZE]

[SIZE=+1]Edit:
Already shipped and here is USPS custom form number: LC550703805US[/size]

 

[fivemega]

[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]

 

[fivemega]

[SIZE=+2]Some more battery holders available.

Please see post #1 for type and size availability.[/SIZE]

 

[Cascadien573]

order for cascadien573
1x Black 8AA to 2D (4.8 volt) $37
$7 shipping to us
total $44.00 thanks in advance!
Transaction ID 4UG08270MP554305S

 

[fivemega]

White 16AA to 4D (19.2 volt) $42 (AVAILABLE)

White 4AA to 1D (4.8 volt) $36 (AVAILABLE)

White 4x14670 to 1.25D (14.8 volt) $36 (AVAILABLE)

Black 8AA to 2D (4.8 volt) $37 (AVAILABLE)

Black 4x14670 to 1.25D (7.4 volt) $36 (AVAILABLE)