Fenix question

[zacharious8]

Quick question.

Can I turn my Fenix LD20 into a LD10 by buying the stock LD10 body?

Can I also turn my Fenix PD3 into a P2D by buying the stock P2d body?

On a side note how did I end up with theses lights plus the TK40 and the LD01? I only needed one light but for some reason had to have more. I blame CPF. Or should I thank you?

Zac

 

[HKJ]

Quick question.

Can I turn my Fenix LD20 into a LD10 by buying the stock LD10 body?

Yes, bot are low voltage units, i.e. 3 volt and below.

Can I also turn my Fenix PD3 into a P2D by buying the stock P2d body?

No, PD3 only works with voltage above 4 volt, P2D is the low voltage body.

 

[Gunner12]

This has been asked many times and answered many times. Just use search.

LD10, LD20, and PD20 all have the same head, just different bodies. So a LD10 can be a LD20 and PD20 with the right body tube and so on. This head uses a boost circuit to raise the voltage from the batteries. The PD30 will thread on to the LD10, LD20, and PD20's body, but it won't work on them. Don't try the PD30 body with the LD10/LD20/PD20 head because that could fry the circuit and LED. The PD30 uses a buck circuit to lower the voltage to what the LED needs.

The L1D, L2D, P2D, L1T V2.0, and L2T V2.0 bodies all work with the LD10/LD20/PD20 head and vice versa.

:welcome: